Manual Scheppach AVC20 (page 19 of 108) (English, German, French, Italian, Polish, Swedish, Finnish)

781458

Zoom out

Zoom in

1/108

www.scheppach.com GB | 19

Installing the machine head (1) (g. A)

• Place the machine head (1) on the stainless steel

container (6). Secure the machine head (1) with the

locking hooks (8). When installing the machine head

(1), ensure that the locking hooks (8) latch into place

correctly.

Mounting the HEPA lter (14) (g. E + F)

• Push the protective grate (15) over the HEPA lter

(14) and place it on the bottom of the machine head

(1). (Fig. E)

• Turn the HEPA lter (14) clockwise to lock it. (Fig. F)

Assembling the suction hose (13) (g. G - I)

• Connect the suction hose (13) to the corresponding

port, depending on the desired use, on the wet and

dry vacuum.

Vacuuming (g. G)

• Connect the suction hose (13) to the suction hose

port (3). To do so, slide the end of the suction hose

(13) with the two nipples into the suction hose port

(3).

• Insert the two nipples into the recesses. In the end

position, turn the suction hose (13) in a clockwise

direction.

Blowing (g. H)

• Connect the suction hose (13) to the blowing func-

tion connection port (9). Slide the end of the suction

hose (13) with the two nipples into the blowing func-

tion connection port (9).

• Insert the two nipples into the recesses. In the end

position, turn the suction hose (13) in a clockwise

direction.

Mounting the hose (13), aluminum tube (16) and at

nozzle (17) (g. I)

• Push the aluminum tube (16) onto the end of the suc-

tion hose (13).

• If desired, the joint nozzle (17) can be plugged onto

the aluminum tube (16).

8. Operation

m ATTENTION!

Before use, check all connections and the HEPA

lter (14) for a rm and secure connection. The

stainless steel container (6) and the HEPA lter (14)

must be absolutely dry.

• Organic solvents (such as gasoline, paint thinner,

acetone, heating oil).

In addition, these substances can corrode the materi-

als used on the device.

m WARNING!

This power tool generates an electromagnetic eld

during operation. This eld can impair active or pas-

sive medical implants under certain conditions.

In order to prevent the risk of serious or deadly in-

juries, we recommend that persons with medical im-

plants consult with their physician and the manufactur-

er of the medical implant prior to operating the power

tool.

6. Technical data

Mains voltage 220-240V~ 50/60 Hz

Power 1200W

Water tank capacity 20 l

Suction performance 20 kPa

Protection category IP20

Protection class II

Technical changes reserved!

7. Assembly

m ATTENTION!

Prior to use, ensure that the device has been cor-

rectly and fully assembled.

Unpacking (g. A + C)

Release the locking hooks (8) and remove the machine

head (1). The accessories are located inside the stain-

less steel container (6).

Installing roller mounts (4) (g. D)

• Turn the stainless steel container (6) upside-down

(the machine head (1) must be removed).

• Connect the castor mounts (4) into the cut-outs pro-

vided on the stainless steel container (6). (3x)

Installing the castors (g. F)

• Press the three castors (5) into the holes of the

wheel mounting (4).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach AVC20 in the language / languages: English, German, French, Italian, Polish, Swedish, Finnish as an attachment in your email.

The manual is 4.45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach AVC20 Manual

Product: