782135

Scheppach ASP100 Kity Manual

19
Zoom out
Zoom in
Previous page
1/24
Next page
international 19
Fig. 7
Montez l’autre bout du tuyau d’aspiration avec le collier de
serrage au manchon d’assemblage E.
m Raccordement électrique
Les raccordements et les réparations électriques ne
peuvent faits que par un électricien agréé.
Le moteur électrique est prêt à l’emploi. Le raccordement
correspond aux normes VDE et DIN applicables.
Le raccordement au secteur ainsi que les rallonge utilisées
doivent correspondre à ces normes.
Informations importantes
Câbles électriques défectueux
Les câbles électriques présentent souvent des défauts
d’isolation
Causes:
• Marques de pression sur les câbles s’ils sont passés par
l’entrebâillement des fenêtres ou des portes.
• Plis causés par une fixation ou une conduite non appro-
priée des câbles électriques.
• Coupures dues à l’écrasement des câbles
• Défauts d’isolation dus à l’arrachement de la prise
murale en tirant sur le câble.
• Fissures dues au vieillissement de l’isolation.
De tels câbles électriques défectueux ne peuvent pas tre
utilisés et représentent un danger mortel en raison des dé-
fauts d’isolation.
Contrôlez régulièrement si les câbles électriques ne sont
pas endommagés. Veillez à ce que les câbles ne soient pas
raccordés au secteur pendant le contrôle.
Les câbles électriques doivent correspondre aux normes
VDE et DIN applicables. Utilisez uniquement des câbles
portant le sigle H05VV-F.
L’impression de la désignation du type sur le câble est
obligatoire.
Moteur à courant alternatif
• La tension du réseau doit être de 230–240 V/50 Hz.
• Les conducteurs des rallonges doivent avoir un diamètre
minimal de 1,0 millimètre carré
• Le raccordement au secteur doit être sécurisé par un
fusible adapté.
Pour une demande de renseignement veuillez indiquer les
données suivantes:
• Fabricant du moteur
• Type de courant du moteur
• Données de la plaque d’identification de la machine
• Données de la plaque d’identification de l’interrupteur
En cas de renvoi du moteur, renvoyez le moteur avec tout
son équipement électrique et l’interrupteur.
Fig. 7
Attach the other end of the suction hose using a hose
clamp and hose coupling E.
m Electrical Connection
Connecting the electrical equipment, or any repair work,
may only be carried out by a qualified electrician.
The built-in electric motor is already connected and ready
for operation. The connection conforms to the relevant
VDE (German Association for Electrical, Electronic and
Information Technologies) and DIN (German Institute for
Standardization) regulations.
The connection to the mains supply made by the custom-
er, as well as the extension cord used, must comply with
these regulations.
Important Notes
Faulty power cords
Power cords often suffer insulation damage.
Causes are:
• Pinching when power cords are routed through windows
or door cracks.
• Bending due to improper attachment or routing of the
power cords.
• Cuts due to driving over the power cords.
• Insulation damage caused by yanking the mains plug
out of the power outlet.
• Cracks in the insulation due to ageing.
Such faulty power cords must not be used and are a danger
to life because of the damaged insulation!
Inspect the power cords for damage on a regular basis.
Make sure that during this inspection the power cord is not
connected to the mains supply.
The power cords must comply with the applicable VDE
(German Association for Electrical, Electronic and In-
formation Technologies) and DIN (German Institute for
Standardization) regulations. Only use power cords marked
as H05 V V- F.
A type identification printed on the power cords is pre-
scribed.
AC Motor
• The power supply should be identical with the marking
plate.
• Extension cords must have a minimum conductor cross
section of 1.0 square millimetres.
• The connection to the power supply must be protected
with applicable (delayed-action) fuse/ circuit breaker.
When you have questions, please include the following de-
tails:
• Motor manufacturer
• Type of current
• The details from the type plate of the machine
• The details from the type plate of the switch
Always send back the whole drive unit including the
switch, when you return the motor.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach ASP100 Kity at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach ASP100 Kity in the language / languages: English, German, French as an attachment in your email.

The manual is 1.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info