548639
51
Zoom out
Zoom in
Previous page
1/93
Next page
English - 50 -
To install factory settings, highlight “First Time Installation”
menu item and press OK button, then you will be asked
whether or not to delete the settings. Selecting “Yes” by
pressing OK button while the “Yes” is highlighted will
delete the existing channel table.
Then you will be asked to confirm for deleting all channels
and settings:
By selecting Yes and pressing the OK button, the existing
channel table will be deleted. After factory settings are
loaded, “First Time Installation” menu will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using “
” or “ ” buttons,
select the desired language option, and press OK button
to activate.
After then, “First time installation” OSD will appear on the
screen. By pressing “
” or “ ” buttons, select the Country
you want to set and press OK button (* only for EU
countries).
Press the OK button to start installation. After search is
completed for digital channels, a message asking whether
to search for analogue channels appears on the screen.
This process is same as described in Automatic Search
section. .
Analogue TV Menu System
Picture Menu
Mode
For your viewing requirements, you can set the related
mode option.
Press “
” or “ ” button to select Mode . Press “ ” or “
” button to choose from one of these options: Cinema ,
Dynamic and Natural .
Brightness/Contrast/Colour/Sharpness/Hue
Press ” or “ ” button to select the desired option. Press
” or “ ” button to set the level.
Note : Hue option can only be visible when the TV receives an
NTSC signal.
Colour Temp
Press ” or “ ” button to select Colour Temp . Press “
” or “ ” to choose from one of these options: Cool , Normal
and Warm .
Note :
• Setting Cool option gives white colours a slight blue stress.
• Setting Warm option gives white colours a slight red stress.
• For normal colours, select Normal option.
Noise Reduction
If the broadcast signal is weak and the picture is noisy, use
Noise Reduction setting to reduce the noise amount.
Press
” or “ ” button to select Noise Reduction. Press
” or “ ” to choose from one of these options: Low ,
Medium , High or Off .
Film Mode
Films are recorded at a different number of frames per
second to normal television programmes.
Press
” or “ ” button to select Film Mode .
Press “
” or “ ” button to set this feature On or Off.
Turn this feature on when you are watching.
films to see the fast motion scenes clearly.
02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 5002_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 50 28.09.2009 17:59:1928.09.2009 17:59:19
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schaub Lorenz LT22-356 DB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schaub Lorenz LT22-356 DB in the language / languages: English, German, Turkish as an attachment in your email.

The manual is 8,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info