652763
9
Zoom out
Zoom in
Previous page
1/42
Next page
Installation of batteries
Remove the cover of the battery compartment on the rear panel of
the remote control unit; slide it downwards and put it aside. Insert
two AAA (R03) batteries into the compartment, observing the
indicated polarity. Do not mix old and new batteries, or
batteries of different types. Replace the battery compartment
cover. Slide it upwards until it locks in place.
Note
:
If the LED’s become dim; please replace the
batteries.
To make your remote control ready for use, you need to carry out one of the
following steps:
Set up device via auto search
1. Switch on the device that you like to control.
2. Point the remote control at your device. Press and hold down the device
button (e.g. TV) for 5 seconds. The LED turns on and after a moment LED
start flashing, that means RCU660 is in auto search mode and you can
release device button.
3. The “Volume+” signal is automatically transmitted from the remote control to
the device (code scan). As soon as the volume of the device (e.g. TV)
changes, immediately press device button to stop the auto search.
If the device you are searching for is a CD player, Tuner, TAPE, or AUX then
“Power” (instead of “Volume+”) signal is automatically transmitted from the
remote control to the device. As soon as the device turns off, press device
key to stop the search. You need to turn on the device by Power button
before you check other button function.
4. Check the function of the other buttons on the remote control. If none of the
buttons function (i.e. the search was not be stopped in time) or the majority
of the buttons do not function correctly, restart the search (see steps 2 to 4)
to find a suitable code. If the majority of the buttons function correctly, set-
up has been successful. Re-press the device button (e.g. TV) to save the
code and to terminate the set-up mode.
Note:
Entering the auto searching mode, it will search forward from the current
code.
Sometimes, remote control does not work properly just because auto search
was not stopped in time. In this case, just enter into manual search again,
and press Vol– button approx. every 1.5 seconds to search backward the
code database.
If you are not satisfied with certain buttons assignments, or some functions
are missing, then you can use additionally learning function.
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schaub Lorenz Ariva 4K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schaub Lorenz Ariva 4K in the language / languages: English as an attachment in your email.

The manual is 11,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Schaub Lorenz Ariva 4K

Schaub Lorenz Ariva 4K User Manual - German - 43 pages

Schaub Lorenz Ariva 4K User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info