Manual Schaub Lorenz 42LT601B (page 84 of 106) (English, German)

548581

Zoom out

Zoom in

1/106

English - 83 -

OK. The following OSD message will be displayed

on the screen:

Press OK to cancel. Select Yes by pressing “ ” or “ ”

button and press OK to delete all of the channels.

First Time Installation

The user can use this item to load default settings,

which were loaded to the receiver at the factory.

To install factory settings, highlight “First Time

Installation” menu item and press OK button, then

you will be asked whether or not to delete the settings.

Selecting “Yes” by pressing OK button while the “Yes”

is highlighted will delete the existing channel table.

Then you will be asked to conﬁ rm for deleting all

channels and settings:

By selecting Yes and pressing the OK button, the

existing channel table will be deleted.

After factory settings are loaded, “First Time

Installation” menu will be displayed.

The menu which is displayed for language selection

appears on the screen at ﬁ rst.

By pressing the “

” or “ ” buttons highlight the

language you want to set and press OK button. After

then, “First time installation” OSD will appear on the

screen. By pressing “ ” or “ ” buttons, select the

country you want to set and press OK button (** for

EU countries).

Note: Country selection OSD will not be available

for UK.

After “First time installation” is performed, the following

message appears on the screen:

To start installation process, select “Yes”, to cancel

select “No”.

• To select the “Yes” or “No” option, highlight the

item by using “

” or “ ” buttons and press the OK

button.

After then, the following OSD will be displayed on

the screen:

If you select CABLE option, the following screen will

be displayed:

You can select frequency ranges from this screen. For

highlighting lines you see, use “ ” or “ ” button. You

can enter the frequency range manually by using the

numeric buttons on the remote control.

• After this operation, you can set Search Step as

8000 KHz or 1000 KHz. If you select 1000 KHz, the

Tv will perform search process in a detailed way.

Searching duration will thus increase accordingly.

When ﬁ nished, press OK button to start automatic

search. Automatic searching screen will be displayed

during the process.

Note: If you select an extended gap between Start

and Stop frequency rate, automatic search duration

will take a longer time.

If you select AERIAL option from the Search Type

screen, the digital television will search for digital

terrestrial TV broadcasts:

The IDTV will automatically tune to the UHF or VHF

(** for EU countries) transmission channels, searching

for digital terrestrial TV broadcasts and displaying the

names of channels found. This process will take about

a few minutes. To cancel searching, you can press the

“MENU” button at any time during the process.

Note: If the digital TV fails to store any channels, “No

channels available.” message will be displayed on

the screen.

Either you select AERIAL or CABLE option from the

search type menu, after the digital automatic search

02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 8302_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 83 27.05.2010 14:31:0827.05.2010 14:31:08

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Schaub Lorenz 42LT601B in the language / languages: English, German as an attachment in your email.

The manual is 5,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Schaub Lorenz 42LT601B Manual

Product: