Manual Schaub Lorenz 32LT655C (page 59 of 85) (English, German)

548579

Zoom out

Zoom in

1/85

English - 58 -

Basic Operations

You can operate your TV using both the

remote control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

• Press “ ” button to decrease volume or

button to increase volume, so a volume level scale

(slider) will be displayed on the screen.

Programme Selection

• Press “P/CH +” button to select the next programme or

“P/CH -” button to select the previous programme.

Viewing Main Menu

• Press “ ” and “ ” buttons at the same

time to view main menu. In the main menu select

sub-menu using “P/CH -” or “P/CH +” buttons and

enter the sub-menu using “ ” or “ ”

buttons. To learn the usage of the menus, refer to

the menu system sections.

AV Mode

• Press the “TV/AV” button in the control panel on the

TV to switch between AV modes.

Operation with the Remote Control

• The remote control of your TV is designed to control

all the functions of the model you selected. The

functions will be described in accordance with the

menu system of your TV.

• Functions of the menu system are described in the

following sections.

Volume Setting

• Press “V -” button to increase the volume. Press “V

+” button to decrease the volume. A volume level

scale (slider) will be displayed on the screen.

Programme Selection (Previous or Next

Programme)

• Press “P -” button to select the previous

programme.

• Press “P +” button to select the next programme.

Programme Selection (Direct Access)

• Press numeric buttons on the remote control to select

programmes between 0 and 9. The TV will switch

to the selected programme. To select programmes

between 10 - 1000 (for IDTV) or 10-199 (for

analogue), press the numeric buttons consecutively.

Press directly the programme number to reselect

single digit programmes.

Initial Settings

When the TV is turned on for the  rst time, the menu

for the language selection appears on the screen. The

message “Welcome please select your language!”

is displayed in all language options sequentially in

the OSD.

By pressing the “ ” or “ ” buttons highlight the language

you want to set and press OK button.

You can get information about the menu usage by

pressing “INFO” button. Press “INFO” button again

to exit the help menu.

After then, “First time installation” OSD will appear

on the screen. By pressing “ ” or “ ” buttons, select

the country you want to set and press OK button.

Note: Country selection will not be available for UK.

Press OK to continue.

After then, the active antenna selection OSD appears

on the screen:

By pressing “ ” or “ ” buttons, set active antenna

mode as on or off.

If an active antenna is connected to your TV, you can

select this option as On. Antenna power should be

“Off” when standard antenna is used instead of the

active antenna. See “Con guration Menu” in the

following sections for more information.

Press OK button on the remote control to continue

and the following message will be displayed on the

screen:

• To select the “Yes” or “No” option, highlight the item

by using “ ” or “ ” buttons and press OK button.

After then, the following OSD will be displayed on

the screen:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Schaub Lorenz 32LT655C in the language / languages: English, German as an attachment in your email.

The manual is 14,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Schaub Lorenz 32LT655C Manual

Product: