548054
81
Zoom out
Zoom in
Previous page
1/93
Next page
English - 80 -
Con guring Source Settings
You can enables or disable selected source options.
The TV will not switch to the disabled source options
when “SOURCE” button is pressed.
Select Sources in the Settings menu and press
OK button.
Press“ or “ buttons to select a source.
Use or button to enable or disable the
selected source. Changes are automatically
stored.
Con guring Satellite Settings
Select Satellite settings in the Settings menu to
con gure satellite settings. Press OK button.
Satellite List: To view available satellite list, please
select Satellite list option from satellite settings menu.
If you want to add new satellite information, please
press YELLOW button. If you want to change satellite
name, please use the navigation buttons. To delete
a satellite from list, press BLUE button or press OK
to edit.
Antenna Installation: In this section, you can
change antenna settings and scan satellite for new
channels.
SatcoDX (optional): You can perform SatcoDX
operations using the Satelite Settings. On SatcoDX
menu, there are two options regarding to satcodx
feature as in the following:
You can download or upload satcoDX data. In order
to perform these functions supported for satcodx
feature, a USB device must be connected to the TV
in the rst place.
You will be able to upload current services and related
satellites & transponders in TV, to a USB device with
a le named “mb70_sdx.sdx “.
In addition to the uploading feature you will be
able to download one of the satcodx les stored in
USB device, to the TV. When download option is
selected, a list of satcodx les stored in USB device
will displayed.
When you select one of these satcodx files, all
services and related satellites and transponders in
the selected le will be stored in TV. If there are any
installed terrestrial, cable and/or analog services,
they will be kept and only satellite services will be
removed.
Afterwards, check your antenna settings and make
changes if necessary. An error message stating No
Signal may be displayed if antenna settings are not
con gured properly.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schaub Lorenz 26LT481CT SI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schaub Lorenz 26LT481CT SI in the language / languages: English, German as an attachment in your email.

The manual is 21,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info