548054
68
Zoom out
Zoom in
Previous page
1/93
Next page
English - 67 -
Unicable: If you have multiple receivers and a
unicable system, select this antenna type. Press OK to
continue. Congure settings by following instructions
on the screen. Press OK to scan for services.
DiSEqC switch: If you have multiple satellite dishes
and a DiSEqC switch, select this antenna type. After
selecting DiSEqC switch, another menu screen will
be displayed. You can set four DiSEqC options (if
available). Press GREEN button to scan all satellites
or press YELLOW button to scan only the highlighted
satellite. To save and exit press OK button.
When there is a short circuit in LNB, Tuner
Overload” message is displayed on the screen, in that
case, please remove your satellite cable immediately
from your TV set.
Auto Tuning
HINT: Auto tuning feature will help you to retune the TV
set in order to store new services or stations.
PressMENU button on the remote control and
select Installation by using or “ button. Press
OK button and the following menu screen will be
displayed.
Select Automatic Channel Scan (Retune) by using
”/“ button and press OK button. Automatic Channel
Scan (Retune) options will be displayed. You can
select options by using /“ and OK buttons.
Auto Channel Scan Menu Operation
Digital Aerial: Searches and stores aerial DVB
stations.
Digital Cable: Searches and stores cable DVB
stations.
Analogue: Searches and stores analogue stations.
Digital Aerial & Analogue: Searches and stores both
analogue and aerial DVB stations.
Digital Cable & Analogue: Searches and stores both
analogue and cable DVB stations.
Satellite: Searches and stores satellite channels.
Whenever you select an automatic search type and
press OK button, a con rmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using .“ or and
OK button.
After auto channel scan type is set and selected
and con rmed, installation process will start and
progress bar will move along. Press MENU button
to cancel process. In such a case, located channels
are not stored.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schaub Lorenz 26LT481CT SI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schaub Lorenz 26LT481CT SI in the language / languages: English, German as an attachment in your email.

The manual is 21,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info