638471
11
Zoom out
Zoom in
Previous page
1/16
Next page
10
ÜBERNAHMEFUNKTION EINRICHTEN
1. Wählen Sie die zweite Fernbedienung, mit welcher Sie die aktiven S3 BTL Lautsprecher
steuern möchten.
2. Schalten Sie die aktiven S3 BTL Lautsprecher ein. (Die grüne LED leuchtet, nachdem sie
zunächst blinkte)
3. Auswahl Signalquelle übernehmen:
a) Drücken Sie Auswahl der Eingangsquelle, bis die rote Status-LED leuchtet.
(Die aktiven S3 BTL Lautsprecher sind nun im Übernahmemodus)
b) Drücken Sie Auswahl der Eingangsquelle, die rote Status-LED erlischt.
c) Drücken Sie auf der zweiten Fernbedienung eine beliebige Taste, mit der Sie die
Auswahl der Eingangsquelle steuern möchten. Die grüne LED blinkt zweimal und
leuchtet dann.
d) Die Übernahme für die Auswahl der Eingangsquelle ist beendet.
4. Lautstärke erhöhen übernehmen:
a) Drücken Sie Auswahl der Eingangsquelle, bis die rote Status-LED leuchtet.
(Die aktiven S3 BTL Lautsprecher sind nun im Übernahmemodus)
b) Drehen Sie den Lautstärkeregler nach rechts, die rote Status-LED erlischt.
c) Drücken Sie auf der zweiten Fernbedienung eine beliebige Taste, mit der Sie Lautstärke
erhöhen steuern möchten. Die grüne LED blinkt zweimal und leuchtet dann.
d) Die Übernahme für Lautstärke erhöhen ist beendet.
5. Lautstärke verringern übernehmen:
a) Drücken Sie Auswahl der Eingangsquelle, bis die rote Status-LED leuchtet.
(Die aktiven S3 BTL Lautsprecher sind nun im Übernahmemodus)
b) Drehen Sie Auswahl der Eingangsquelle nach links, die rote Status-LED erlischt.
c) Drücken Sie auf der zweiten Fernbedienung eine beliebige Taste, mit der Sie
Lautstärke verringern steuern möchten. Die grüne LED blinkt zweimal und leuchtet
dann.
d) Die Übernahme für Lautstärke verringern ist beendet.
Hinweis: Mit dem Gerät im Stand-by-Modus kann das Drücken einer der drei übernommenen
Tasten auf der Fernbedienung (Vol+, Vol-, Source) den Stand-by-Modus
deaktivieren und das Gerät in den Normalbetrieb schalten.
6. Die zweite Fernbedienung kann nun zur Steuerung der aktiven S3 BTL Lautsprecher
benutzt werden.
Rote Status-LED
Grüne LED
Auswahl der Eingangsquelle
Lautstärkeregler
Hinweis: Sie können nicht die mitgelieferte Fernbedienung für die Übernahmefunktion der
aktiven S3 BTL Bluetooth-Lautsprecher benutzen. Entspricht die Fernbedienung
nicht RC5/NEC oder sie ist nicht mit dem Codierformat kompatibel, dann steht
Ihnen die Übernahmefunktion nicht zur Verfügung.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scansonic S3 BTL Active at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scansonic S3 BTL Active in the language / languages: German as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scansonic S3 BTL Active

Scansonic S3 BTL Active User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info