638444

Scansonic P3501 Manual

7
Zoom out
Zoom in
Previous page
1/30
Next page
6
BBC
Customer VBI1.1
BBC
Sleep Set
Sleep
30Min
BBC
s
BBC
Ensemble
BBC
Clock Set
Clock Setting
24H 00:00
Clock Setting
24H 00:00
Clock Setting
24H 00:00
? Press ‘INFO/SCAN’ button and cycle through the information displayed on the bottom line of the LCD display.
? Ensemble name: The name of the ensemble (Channel number) in which the current service is found.
? Time and Date: The time and Date obtained from the current multiplex, this will be updated in every
minute approximately
? Bit-rate & the audio status: The bit rate (kbps) and the audio status (Mono or Stereo) of the current
service.
? DLS: Scrolling text accompanying the audio, where available, from the service provider. The text will be
continually scrolled along the bottom line. This text may include current song playing, text numbers for
competitions, etc.
? Program type: A description of the type of the content being broadcast by the service, e.g. ‘Pop music’
? Signal Strength: The signal strength of the current ensemble
SOFTWARE VERSION
? Long press ‘MENU’ and cycle through it until the software version number is
displayed.
The LCD screen will show the version of software that has been used in this unit.
CHOOSING A CLOCK MENU
The first time switch on the unit, the clock & date will be automatically set from the
transmitted with the DAB radio signal.
Alternatively, you can set the clock & date to show a time different from the local time
zone.
Or, you need to set the clock & date manually when no DAB signal.
To set the Clock, go into the clock setting menu by following:
? Press ‘MENU’ button to choose Clock Set, then press ‘SELECT’ button
The LCD display will show the hour “12” is flashing
? Press ‘UP’/’DOWN’ button to choose the HOUR display format “12”H or “24”H, then
press ‘SELECT’ button
The LCD display will show the “00” is flashing
? Press ‘UP’/’DOWN’ button to set HOUR, then press ‘SELECT’ button
The LCD display will show the “00” is flashing
? Press ‘UP’/’DOWN’ button to set MINUTE, then press ‘SELECT’ button
To show the new time and date, press the “STANDBY’ button.
SETTING the SLEEP TIMER
The sleep timer switches your radio into standby after a number of minutes.
? To set/change the sleep timer
? Press ‘MENU’ button to cycle through the SLEEP SET setting and press ‘SELECT’
The LCD display will show Sleep, and the “30” Min is flashing
? Press ‘UP’/’DOWN’ button and press ‘SELECT’ to set the MINUTE
It has OFF / 15minute / 30 minute / 45 minute / 60 minute for selection
? The LCD display will show the “S” after the sleep timer is set
To cancel the sleep timer, enter into the SLEEP SET again and ‘UP’/’DOWN’ button to
select OFF to cancel the sleep timer.
To exit from the menus at any times, press the
‘MENU’ button again, or simply leave all controls
untouched for a few seconds.
BBC
BBC Ensemble
BBC
12:30 01/01/2009
BBC
Stereo 128kbPS
BBC
Pop Classic
BBC
BBC Music
BBC
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scansonic P3501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scansonic P3501 in the language / languages: English, German, Danish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info