638438

Scansonic IN300 Manual

11
Zoom out
Zoom in
Previous page
1/17
Next page
10
SCANSONIC REMOTE APP
1 Introduction
Scansonic Remote App is an application for iOS Smart Devices that allows users to control Venice 6.2, Venice 6.5,
Venice 7, and Verona - based radios running IR2.2, IR2.5, DAB 4.3 and DAB 5.0 software.
The App also provides a convenient way to connect to iPhone/iPad/iPod touch, for DAB/DAB+/FM digital radio units
without a suitable display or internet connectivity. Internet access is via the iPhone/iPad/iPod touch network or 3G
connection.
Connection can be via a network (Ethernet and wireless), being controlled depending on the capabilities of the
radio unit. DOK works on all iPhones, iPads and iPod touch devices running iOS 3.1.3 or later (also iPad and iPad 2
devices in iPhone compatibility mode).
An Android version of the app is also available.
Note: Although only one radio can be actively controlled at any one time, once you have set a radio unit to play in a
particular mode, the unit will continue to operate in that mode even if you switch to control another unit.
Note: For brevity, “Smart Device” is used in this guide to mean iPod touch or any Smartphone or tablet running a
suitable version of iOS operating system.
2 Getting Started
The app can control a radio unit from a Smart Device using a WiFi Network connection. Before DOK can be used
to control a radio unit, you must rst establish a network connection between the Smart Device and the radio unit(s)
you wish to control.
2.1 Network Connection Setup
2.1.1 If the radio unit is using IR 2.2 or IR 2.5 rmware
On the radio unit, navigate to Menu > Main menu > System settings > Network > Keep network connected, and
select YES.
The network connection now stays on even when the radio unit is in standby mode. This setting is saved in the radio
unit’s memory.
Important: If Network > Keep network connected, is set to NO, the app will lose
connection when switching to other inputs than internet radio.
2.1.2 Connecting to the same network
Set the Smart Device to use the same network access point as the radio unit:
1. From the main Smart Device screen, select Settings > Wi-Fi.
2. Choose the network, to which the radio unit(s) is connected, from the list.
2.1.3 Establishing a connection over a network
The rst time the app is used, if more than one radio is found, a screen listing the
available radio units opens.
Select the radio that you want to control from the Radio list.
(You can only control one radio at a time. To change the radio unit at a later time, the
Radio list is available from the Main Tabs - Settings > Radio)
If only one radio is found on the network or a radio has been previously selected the
list screen is skipped.
The rst time you connect to a specic radio unit via a WiFi or Ethernet network you
are requested to enter the remote control PIN (1234), to allow the app to remotely
control the radio unit.
Once a valid pin has been entered the app connects to the radio and displays its
current listening mode.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scansonic IN300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scansonic IN300 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scansonic IN300

Scansonic IN300 User Manual - German - 17 pages

Scansonic IN300 User Manual - Dutch - 17 pages

Scansonic IN300 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info