745592
10
Zoom out
Zoom in
Previous page
1/28
Next page
ASSEMBLY
10
Load bearing foundation
The stoves of the Scan 85 series weigh from 204 kg to 220 kg. You
should therefore make sure that the foundation can bear the weight
of the wood-burning stove and that of the chimney.
Floor plate
If you are setting up the stove on a flammable floor, observe national
and local regulations on the size of the non-flammable foundation
that covers the floor around the stove.
Your local Scan dealer can advise you on regulations concerning
flammable materials in the vicinity of your stove.
The idea behind the floor plate is that it protects the floor and flam-
mable material against sparks.
The floor plate can be made of steel or glass, and the stove can be set
up on brick, natural stone or similar materials.
This Scan wood-burning stove has an integrated floor plate, and
can thus be set up on any flammable material without a protective
foundation.
Small shaped floor plate for the Scan 85 series
Existing chimney and pre-fabricated element
chimney
If you intend to connect your stove to an existing chimney, it makes
sense to contact an authorised Scan dealer, or a local chimney sweep
for advice. These experts will also let you know if your flue needs
renovating.
When connecting a pre-fabricated element chimney, follow the
manufacturer’s connection instructions for the relevant chimney
type.
Connection between stove and steel chimney
Your Scan dealer, or local chimney sweep, can advise you on choosing
a make and type of steel chimney. This ensures that the chimney will
match your wood-burning stove.
Requirements for chimney
The chimney must have a minimum internal diameter of 148 mm
and have a T400 designation, with G for the soot fire test.
As a general rule, the length of the chimney should not be less than
4 metres, measured from the top of the stove. Specific weather or
installation conditions might require a different length.
The requirements to the chimney and the flue pipe in terms of safety
distances must be met.
Choosing the wrong length or diameter of steel chimney could
impair functionality.
Always comply exactly with the instructions provided by the steel
chimney supplier.
Connection with 90° elbow pipe
If you opt to connect the stove with an elbow pipe, you should use a
curved elbow, as this gives a better draught.
If you connect the stove with a sharp elbow pipe, the cleansing lid
must be placed in the vertical part so that the horizontal part can be
cleaned through here.
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan85\90585009.idw
90585009
Scan 85 med knærør
27-02-2018
Ken
Scan 85
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan85\90585007.idw
90585007
Scan 85 med lille formgulvplade
22-02-2011
BC
Scan 85
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan85\90585008.idw
90585008
Scan 85 med stor formgulvplade
26-02-2018
BC
Scan 85
VÆGT:
AREAL:
N/A
N/A
Large shaped floor plate in steel
or large base floor plate in glass
for the Scan 85 series
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scan 85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scan 85 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scan 85

Scan 85 User Manual - German - 28 pages

Scan 85 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info