745578

Scan 80 Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
F ( 1 : 8 )
G ( 1 : 8 )
F
G
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 80\90580029.idw
90580029
ekstern forbrændingsluft
16-05-2017
jwa
Scan 80
Weight:
Area:
N/A N/A
Ø170mm.
F ( 1 : 8 )
G ( 1 : 8 )
F
G
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 80\90580029.idw
90580029
ekstern forbrændingsluft
16-05-2017
jwa
Scan 80
Weight:
Area:
N/A N/A
Ø170mm.
F ( 1 : 8 )
G ( 1 : 8 )
F
G
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 80\90580029.idw
90580029
ekstern forbrændingsluft
16-05-2017
jwa
Scan 80
Weight:
Area:
N/A N/A
Ø170mm.
F ( 1 : 8 )
G ( 1 : 8 )
F
G
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 80\90580029.idw
90580029
ekstern forbrændingsluft
16-05-2017
jwa
Scan 80
Weight:
Area:
N/A N/A
Ø170mm.
14
FRESH AIR INTAKE
In a well-insulated house the air used for the combustion process has to be replaced. This particularly applies to houses
with mechanical ventilation. There are different ways of making sure that air is exchanged. The most important thing is to
ensure that there is a supply of air to the room where the wood stove is located. The external wall vent must be located as
close to the wood stove as possible, and you must be able to close it when you are not using the stove.
National and local building regulations must be followed with regard to connection of a fresh air intake.
CLOSED COMBUSTION SYSTEM
You should use the closed combustion system for the wood-burning stove if you live in a newly-built, airtight home.
External combustion air is connected through a ventilation pipe via the wall or floor.
We recommend mounting a valve in the ventilation pipe in order to avoid condensate in the stove and the pipe system,
which can be closed when the oven is not in use. It can also be an advantage to insulate the ventilation pipe.
Minimum
Ø 100 mm ventilation pipe, maximum length: 6 metres with a maximum of one bend.
If you want external combustion air at the rear, you must close the hole in the bottom with the dismounted cover plate.
NOTE: if the stove has a fresh air connexion or closed combustion, the ventilation pipe must be open, when the stove
is in use!
External combustion air is
connected at the con-
nection piece under the
combustion chamber.
If you want external combustion
air via floor or wall, remove the
cover plate with a pair of cutting
pliers
LOAD-BEARING SUBSURFACE
All items in our product range come under the category of lightweight fireplaces and stoves and do not normally require
any reinforcement of the beam structure. They can be positioned on ordinary beams/floor.
You should of course make sure that the foundation on which the stove is positioned can indeed support the weight of
the stove and, where applicable, a steel chimney, if you have opted for this solution. In case of doubt about the carrying
capacity of the floor, please consult a building expert.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scan 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scan 80 in the language / languages: English as an attachment in your email.

The manual is 4,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scan 80

Scan 80 User Manual - German - 32 pages

Scan 80 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info