745589
8
Zoom out
Zoom in
Previous page
1/36
Next page
8
ASSEMBLY
TOOLS FOR THE MOUNTING OF THE BUILT-IN STOVE
¬ Spirit level ¬ Cordless electric drill
¬ Tape measure/foot rule ¬ Rubber hammer
LOOSE PARTS
The following loose parts are located in the built-in stove's combustion chamber:
¬ Oven mitt ¬ Flue connection piece
¬ Gasket for flue connecting piece ¬ Screws for fastening the flue connection piece
¬ Product registration number ¬ Combustion chamber lining
¬ Brackets for baffles plates
Extra parts for Scan 5003-S:
¬ Type plate ¬ Eco energy label
¬ Calcium Silicate Surround ¬ Steel base
¬ Glue cartridge ¬ 1 l. primer
¬ 10 Lamello P-14 - female ¬ 10 Lamello P-14 - male
¬ 10 Lamello P-14 pre-load clips ¬ 1 Tenso P-14 pre-load tool
¬ 4 Brackets ¬ 4 M5x10 screws
¬ 34 Metal pins ¬ 96 Screws Ø4x25/Ø8 (PAN TX20)
¬ 4 Adjustment screws ¬ 4 Steel bars
¬ 4 Washers Ø5 3/20x1,5 (HV140)
ADDITIONAL ACCESSORIES
¬ Floor plates (see page 9) ¬ Fresh air box (see page 12)
¬ Connection pipe Ø 100 mm ¬ Heat-storage stones (see page 13)
¬ Heat shields/convection covers (see page 14)
DISPOSAL OF PACKAGING
Your Scan built-in stove may come supplied with the following packaging:
Wood packaging
The wood packaging can be reused and after final use can be incinerated as a CO
2
neutral
product or sent for recycling.
Foam Send for recycling or waste disposal.
Plastic bags Send for recycling or waste disposal.
Stretch/plastic film Send for recycling or waste disposal.
LOAD-BEARING FOUNDATION
All items in our product range come under the category of lightweight fireplaces and stoves and do not normally require any
reinforcement of the beam structure. They can be positioned on ordinary beams/floor.
You should of course make sure that the foundation on which the stove is positioned can indeed support the weight of the stove
and, where applicable, a steel chimney, if you have opted for this solution. In case of doubt about the carrying capacity of the
floor, please consult a building expert.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scan 5003 S FR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scan 5003 S FR in the language / languages: English as an attachment in your email.

The manual is 9,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scan 5003 S FR

Scan 5003 S FR User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info