* The scaling is only
an approximation,
and is not suitable
for determining
correct drug dosage
Setting up the device:
Before each use, the nebuliser and accessories should be cleaned in
accordance with instructions in "Cleaning and disinfection" .
1. Open the sprayer by turning the upper part
anti-clockwise, and enter the prescribed medicine into the
sprayer lower part.
6
Drying: Place all disinfected components on a tea towel or paper towel and let
them dry for at least 4 hours.
After a 6 month period of use, the sprayer should be changed for mechanical and
hygienic reasons. You can order a new one via the customer service center.
Storage of the sprayer and other accessories
Between regular uses, these parts should be wrapped in a dry cloth and kept in a
dust-free location.
For a longer storage period, protect it with a dry cloth together with the compressor
included in the retail box.
Cleaning of the compressor: Turn the compressor off and unplug it from the wall
before you start cleaning. The device must never be submerged in water for
cleaning. Use a damp cloth to clean the housing unit.
Never use thinner, alcohol or flammable chemicals for cleaning!
Changing the air filter:
Change the air filter (on the right side of the device)
as soon as it is dirty
or is no longer white. You can order more air filters
via customer services.
11
Cleaning, disinfection and drying of all accessories:
Cleaning: Disconnect the sprayer and the other accessories such as mask, mouth
and nose pieces from the hose.
Open the sprayer by turning the upper part and separate it into its components
(upper part, nozzle, lower part). Clean all sprayer and accessories under warm
running water at at least 40 °C using commercially available detergents. The
cleaning process should be done thoroughly and should take 5 minutes. Then rinse
all cleaned parts thoroughly in 40 °C warm running water. Shake to remove drips.
Alternatively, you can clean the disassmbled sprayer and the other components in
the dishwasher.
