535751
2
Zoom out
Zoom in
Previous page
1/4
Next page
2
Hold
Enter into
RF
registering
state
Enter into
temperature alert
setting
-----
Enter 160
cities set
Temperature set
Click
Choose the
channel
need to be
set
Confirm the
setting
One step
backward
-----
Hold
-----
-----
8steps/second
backward
-----
Height
set
Click
-----
-----
One step
backward
-----
Hold
-----
-----
8steps/second
backward
-----
TIME SET Key:
Hold TIME SET key for 2 seconds to enter into time setting mode, the sections being set will flash in the frequency of 1 Hz/second,
press UP or DOWNto choose the value needed then press TIME SET key to confirm the setting.
It will return to standard mode automatically, if there is no operation for more than 7 seconds.
ALARM Key
Click Alarm key to display alarm time, press once to display AL1; twice for Al2; thrice to return to standard state. Hold Alarm key
for 2 seconds to enter alarm setting, the sequence: AL1/ AL2 Hour Minute Exit.
It will return to standard mode automatically, if there is no operation for more than 7 seconds.
UP Key
Under setting mode, click UP Key to adjust one step (forward), holding the UP Key for 2 seconds to enter speedy adjusting mode (8
steps/seconds).
DOWN Key
Under setting mode, click DOWN Key to adjust one step (backward), holding the DOWN Key for 2 seconds to enter speedy
adjusting mode (8 steps/seconds).
Under standard mode, Click DOWN Key to turn alarm on/off, the setting sequence: AL1 on/ AL2 off AL2 on/ AL1 off AL1,
AL2 on AL1, AL2 off.
SNOOZE Key
When the alarm is ringing, click SNOOZE key to pause the alarm, and enter 5 minutes of snooze function.
LOCATION Key
Under standard mode, hold the LOCATION key for 2 seconds to enter city setting.
Under city setting state, hold UP or DOWN key to choose the city, and then click LOCATION key to confirm the setting and exit
the state.
CHANNEL Key
Under standard mode, click Channel key to shift RF channel, CH1CH2 CH3displaying circularly.
Under standard mode, hold Channel Key for 2 seconds to clean out RF registering state, temperature displays and MAX/MIN value.
Under Alert setting channel state, choose the needed setting channel..
MAX/MIN Key
Click Max/Min key to display MAX value of indoor/outdoor temperature, humidity for 5 seconds. Click once again to display the
MIN values for 5 seconds, click again to return to standard mode.
When it displays the Max or Min values, hold Max/Min key for 2 seconds to clear out the memory of the Max/Min values, then return to
normal standard state.
ALERT Key
Under standard mode, click Alert key to turn temperature alert on/off.
Under standard mode, hold Alert key for 2 seconds, it will enter temperature alert setting.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saxon 8710P3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saxon 8710P3 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info