663098

Sauber POWERPROF SCP-9000 Manual

12
Zoom out
Zoom in
Previous page
1/16
Next page
12
SCP-9000
POWERPROF
Danger and Live Parts Within.
Always unplug the vacuum from mains
power supply before dismantling any part
of the machine. The vacuum cleaner powerhead
contains electrical connections. The vacuum cleaner
powerhead is not a serviceable part.
Removing the Brush Roller: To remove the brush roller,
press the button marked “PRESS” (9) and turn the bearing
(8) downward. Turn the brush (24) quickly to the right and
pull it out. We recommend regular removal of threads and
hair which have wound around the brush roller.
Removing Blockages: If you can only feel a small amount
of suction or the brush is not functioning correctly there might be a blockage.
Please refer to your vacuum cleaner manual first and have a look at the Removing Blockages
section. Check the swivel neck of the powerhead and the orange trap-door (11) on the
bottom of the powerhead. Also check between these two openings in the powerhead.
Start at setting 4 on the height adjuster (2) and adjust
according to the indicator light (6+7). The electronic
brush control constantly monitors the status of the brush,
communicating the status through the lights on top.
Green (7) and red (6): The brush is not fully engaged in
the carpet. The height adjustment should be lowered. If the
height adjustment is at its lowest setting, the brush is worn and needs to be replaced.
This detail applies only to carpet.
Green light only (7): Brush is working well. We strongly recommend in normal use
selecting a brush height that is only one level beneath that at which both the green and
red lights are on. For maximum cleaning performance, the brush height adjustment can
be lowered to its lowest setting.
Red light only (6): The brush is blocked. (see below Removing Blockages) Turn off the
machine, unplug it, and then remove the blockage.
To clean delicate floor surfaces the powerhead is equipped with an on/off switch. When
this switch is used to turn off the brush roller the indicator lights (6+7) are also turned off.
Maintenance
Selecting the correct brush height
8
9
24
11
3
10
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sauber POWERPROF SCP-9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sauber POWERPROF SCP-9000 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info