782997
13
Zoom out
Zoom in
Previous page
1/16
Next page
13.
advance
5. To separate the mesh filter from the filter cone, turn the base of
the mesh filter to the “unlock” position and gently remove. The
filter cone and mesh filter can be washed using lukewarm water.
The filters needs to be air dried for 24 hours before it can be
reinstalled into the machine.
Replacing the Exhaust Filter
1. The Exhaust Filter is installed behind the Exhaust Grille. Press
the Filter Release button to remove the Exhaust Grille. The
Exhaust Filter can now be removed from the Exhaust Grille.
Note: The Exhaust Filter is not a washable filter. It is
recommended to replace the filter every 6 months or when
it becomes visibly dirty.
Maintenance
Cleaning or Replacing the Roller Brush
1. Disconnect the powerhead from the rod.
2. To release the roller brush from the powerhead, press the Roller
Brush Quick Release button with one hand and lift the roller
brush from the powerhead with the other hand.
3. If a build-up of debris is wound around the roller brush, remove
by carefully cutting with a scissors. Avoid damaging or cutting
the bristles.
4. To reinsert the roller brush, insert the left side of the roller brush,
as shown, then gently push the right side into the powerhead
until it clicks into place.
unlock
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sauber Advance Handstick at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sauber Advance Handstick in the language / languages: English as an attachment in your email.

The manual is 0.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info