441342
9
Zoom out
Zoom in
Previous page
1/12
Next page
pag. 8
The zero value of the display reading is able to adjust itself automatically
if small deviations from the zero value occur, like dust on the weigh
platform, long-lasting loading or temperature changes.
The auto zero will be active only within a selectable number of scale
divisions: from 0 up to 4 divisions deviation from zero.
Selection "0" switches off the auto zero function.
The number of divisions may be selected with key .
Confirm the selection with key , the next menu section will be switched on.
In unfavourable environments it may be required to add extra stabilisation
for the display reading, e.g. at vibrations of the environment. The weight
reading will show a retarded response upon impulses and shocks.
Selectable from 0 to 4: 0 = no extra damping, 3 = maximal damping.
The strength of damping may be selected with key .
Confirm the selection with key , the next menu section will be switched on.
The "auto off" causes the scale to shut down automatically after . . minutes
of standstill (not in the user and calibration modes).
0 = auto off is switched off
1 = 2 minutes
2 = 5 minutes
3 = 20 minutes
4 = 60 minutes
The delay time may be selected with key .
Confirm the selection with key , the next menu section will be switched on.
Connected with the signs: "HI', "OK" and "LO" in the check-weighmode,
a interrupted "beep" may sound.
3 settings are available: 0 = no "beep" at all
1 = "beep" only if the weight = OK
2 = "beep" only if the weight = HI or LO
At exact zero of the reading, the "beep" is switched off. The accuracy of the
sound is based upon the High Resolution weight reading, even if this is not
the actual selected weight reading.
The setting is selectable with key .
Confirm the selection with key , the next menu section will be switched on.
WEEGTECHNIEK HOLLAND B.V. Website www.satex.nl Tel +31 36 522 20 30
Patroonsweg 23 Email info@satex.nl Fax +31 36 522 20 60
3892 DA ZEEWOLDE The Netherlands
Manual SA 235
Automatic zero setting (Auto zero, keeps weight reading automatically on zero)
Automatic switch off (battery saving)
0 . . .4
scale
devisions
Filter, damping of the reading
0 . . .
3
filter
stren
g
th
"Beep" sound with check-weighing
0 . . .
2
"beepsound"
functions
0 . . . 4
auto off
t
i
me dela
y
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satex SA 235 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satex SA 235 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satex SA 235

Satex SA 235 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info