699394
39
Zoom out
Zoom in
Previous page
1/44
Next page
SATEL VERSA Plus 37
7.1.1 Forced arming
1. After an attempt to arm the system from the keyfob has failed, approach the keyfob, enter
the code and press .
2. A message will appear on the display indicating why the arming has been denied. If the
message includes the “1=Ok” phrase, you can press the key to force the arming.
3. Press again the keyfob button to which the arming function is assigned.
Information on the forced arming is written into the event log.
7.2 Failure of the arming procedure initiated from keyfob
The information given below is not applicable, if the keyfob button controls arming
zone.
The installer can configure the alarm system in such a manner that it will not become armed,
if at the moment the exit delay countdown ends:
there is a violated zone in partition which was not violated when the arming procedure was
started,
there is a trouble which did not exist when the arming procedure was started.
The installer should see to it that the user is effectively notified of the failure of
procedure to arm the system initiated from the keyfob.
8. Operating the alarm system by telephone
You can operate the alarm system by using a touch-tone (DTMF) telephone. The voice menu
makes the operation an easy job. To access the voice menu, call the phone number of the
control panel. Establish, in consultation with the installer, the phone number to call to get
access to the voice menu.
The installer can make the option of operating the system by phone conditional on the
partition state (the operation being only possible when the selected partitions are
armed).
8.1 Starting the operating by telephone
The control panel can have three phone numbers: analog communicator number,
SIM1 card number and SIM2 card number.
Two SIM cards can be installed in the control panel, but they cannot be used
simultaneously by the GSM communicator. If the phone number of one of the SIM
cards is not available at a given moment, call the phone number of the other card.
1. Call the control panel phone number. After the call is received, you will hear three short
beeps.
The installer can configure the control panel in such a manner that the analog
telephone communicator will only go off hook after the recall. If this is the case, call the
number, but hang up after the number of rings which has been set by the installer. Call
again within three minutes. The call will be received.
2. Enter the code from the telephone keypad and confirm by pressing #. 4 short beeps
followed by 1 long beep will confirm you have got access to the interactive voice menu. If
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa Plus in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa Plus

Satel Versa Plus Additional guide - English - 110 pages

Satel Versa Plus Installation Guide - English - 36 pages

Satel Versa Plus Quick start guide - English - 11 pages

Satel Versa Plus Installation Guide - English - 32 pages

Satel Versa Plus Quick start guide - German - 12 pages

Satel Versa Plus Additional guide - German - 113 pages

Satel Versa Plus User Manual - German - 46 pages

Satel Versa Plus Installation Guide - German - 36 pages

Satel Versa Plus Quick start guide - Dutch - 11 pages

Satel Versa Plus User Manual - Dutch - 46 pages

Satel Versa Plus Additional guide - Dutch - 110 pages

Satel Versa Plus Additional guide - Dutch - 2 pages

Satel Versa Plus Installation Guide - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info