699394
33
Zoom out
Zoom in
Previous page
1/44
Next page
SATEL VERSA Plus 31
6.19.2 Trouble handling procedure
Each trouble poses a danger to proper functioning of the alarm system and should be
repaired as soon as possible. If necessary, consult the installer.
In the event of failure of the control panel processor system (HSE), when you have
exited the 7. SYSTEM STATE function by using the key, the “Make VERSA panel
restart? 1=Yes” message will be displayed. Pressing the key will restart the
control panel and repair the trouble.
6.19.3 Trouble memory and clearing the trouble memory
The installer defines whether only the current troubles are to be presented, or also those
which have already ended. The flashing letter “M” in the upper right corner of the display
means that the trouble has already ended.
You can clear the trouble memory after quitting the function:
1. Press to quit the function. The “Clear trouble memory? 1=Yes” prompt will be
displayed.
2. Press to clear the trouble memory (pressing another key will cancel clearing the
trouble memory).
If the SERVICE MESSAGE AFTER TAMPER ALARM option is enabled in the control panel,
only the installer can clear the tamper alarm memory.
6.20 Output control
Using the keypad, you can control the operation of devices connected to the outputs (e.g. to
raise/lower roller blinds/shutters, turn on/off lighting or heating, etc.). The installer defines
how the outputs should work (whether the output will be activated for a defined time, or it will
remain active until deactivated by the user, timer, etc.).
6.20.1 Quick control of outputs
The installer can assign outputs to the numeric keys and allow them to be quickly controlled
(without entering the code).
Quick activation of output
Press the key to which the controllable output is assigned, and then .
Quick deactivation of output
Press the key to which the controllable output is assigned, and then .
6.20.2 Controlling the outputs by means of proximity card VERSA-LCDR /
VERSA-LCDM-WRL
The status of outputs can be toggled by using the proximity card, provided that the keypad
has been configured by the installer so as to make this function available. In order to toggle
the output status, bring the card close to the keys and hold it there for about 3 seconds.
6.20.3 Controlling the outputs by means of function
Enter the user menu and press in turn . The output number is shown in the upper
line of the display, and the output name in the lower line. You can scroll through the list of
outputs by using the and
keys. Information on the output state is shown in the
upper right corner of the display:
– output is activated,
– output is deactivated.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa Plus in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa Plus

Satel Versa Plus Additional guide - English - 110 pages

Satel Versa Plus Installation Guide - English - 36 pages

Satel Versa Plus Quick start guide - English - 11 pages

Satel Versa Plus Installation Guide - English - 32 pages

Satel Versa Plus Quick start guide - German - 12 pages

Satel Versa Plus Additional guide - German - 113 pages

Satel Versa Plus User Manual - German - 46 pages

Satel Versa Plus Installation Guide - German - 36 pages

Satel Versa Plus Quick start guide - Dutch - 11 pages

Satel Versa Plus User Manual - Dutch - 46 pages

Satel Versa Plus Additional guide - Dutch - 110 pages

Satel Versa Plus Additional guide - Dutch - 2 pages

Satel Versa Plus Installation Guide - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info