699461

Satel VERSA-KWRL2 Manual

7
Zoom out
Zoom in
Previous page
1/14
Next page
SATEL VERSA-KWRL2 5
1. Click on the “Read” button to read the data related to wireless keypads from the controller
(these data are not read after clicking on the button in the main menu).
2. Click on the “New device” button.
3. The “New wireless dev.” window will open.
4. In the “Serial number” field enter the serial number of the added device.
5. In the “Address” field, select which address is to be assigned to the keypad to be added.
6. Press any button on the keypad.
7. The message will confirm that a keypad has been added (unless you have entered an
invalid serial number, of which you will be informed by a message). The name assigned to
the keypad will be displayed. You can change it.
8. Click “OK” (to cancel adding the keypad, click on the “Quit” button).
9. The “New wireless dev.” window will close.
10. The new keypad will appear in the table, “LCD-WRL” tab, as well as on the list of
expanders.
11. Click on the “Write” button to write the new wireless keypad data to the controller (these
data will not be written after clicking on the button in the main menu). Additionally,
the new keypad data will be automatically written to the control panel.
3.1.2 LCD keypad
You can add wireless keypads in the service mode by means of the “New device” function
(“2. Hardware” “1.Kpds. & exps. “3.Wireless mod.” “1.New device”).
1. Having started the function, enter the serial number of the added keypad.
2. Press .
3. When the “Open device tamper” message is displayed, press any key on the keypad.
4. Information on the added keypad will be displayed (if nothing happens, it can mean that
you have entered an invalid serial number – if this is the case, press to return to the
submenu).
5. Press .
6. Using the and keys, select the address which is to be assigned to the keypad
to be added.
7. Press
.
8. The name assigned to the keypad will be displayed. You can change it.
9. Press .
10. In the next steps, you can configure the settings stored in the ABAX 2 / ABAX controller
(see: p. 6).
3.2 Removing the keypad from the wireless system
3.2.1 DLOADX program
You can remove the wireless keypads in the “VERSA – Structure” window, “Hardware” tab,
after clicking on the name of ABAX 2 / ABAX controller on the list of devices, and then on the
“LCD-WRL” tab (see: Fig. 3 p. 7).
1. Click on the “Read” button to read the data related to wireless keypads from the
controller.
2. Click on the wireless keypad you want to remove.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA-KWRL2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA-KWRL2 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA-KWRL2

Satel VERSA-KWRL2 User Manual - German - 14 pages

Satel VERSA-KWRL2 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info