629722
11
Zoom out
Zoom in
Previous page
1/32
Next page
SATEL VERSA IP 9
there is a trouble which did not exist when the arming procedure was started.
3.3 Disarming and alarm clearing
Disarming and alarm clearing are carried out in the same way, the procedures being
interconnected. If the partition is armed and an alarm is triggered in it, then disarming will
also mean alarm clearing.
In order to clear the alarm without disarming the partition, arm again the partition in the
same mode (see: “Arming” p. 7).
3.3.1 Disarming and alarm clearing without partition selection
Enter the code and then press . Disarming / alarm clearing will take place in the
partitions to which you have access.
3.3.2 Disarming and alarm clearing in selected partition
1. Indicate partition which is to be disarmed and/or where alarm is to be cleared (press one
of the keys:
- partition 1; - partition 2).
2. Press
. Backlight of the keys will start blinking, which indicates that the code must
be entered.
3. Enter the code.
4. Press or .
3.3.3 Viewing the zones which triggered alarm
Having cleared the alarm, you can check which zones triggered the alarm (this does not
apply to the TMP zone of the control panel). The information will be available until viewing the
zones or arming the system.
Enter the code, and then press in turn . Information on the zones which
triggered alarm is presented on the LEDs designated by numbers. The blinking LED means
that the zone with number corresponding to that of the LED triggered alarm.
3.4 Quick inspection of partition status
If such an option is provided by the installer, pressing and holding down the key for
about 3 seconds will display information on the partition state (whether it is armed and what
type of arming mode is set). At the same time, the LED will come on. Information on the
partition status is provided by means of LEDs 1-3 (partition 1 status) and LEDs 16-18
(partition 2 status):
none of the LEDs is ON – partition is disarmed,
LED 1 is ON – full armed mode in partition 1,
LED 2 is ON – night armed mode in partition 1,
LED 3 is ON – day armed mode in partition 1,
LED 16 is ON – full armed mode in partition 2,
LED 17 is ON – night armed mode in partition 2,
LED 18 is ON – day armed mode in partition 2.
To terminate the function of partition state presentation, press . The keypad will quit the
function automatically after 2 minutes.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa IP in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa IP

Satel Versa IP Quick start guide - English - 11 pages

Satel Versa IP Installation Guide - English - 36 pages

Satel Versa IP User Manual - English - 43 pages

Satel Versa IP Additional guide - English - 93 pages

Satel Versa IP Quick start guide - German - 11 pages

Satel Versa IP Additional guide - German - 97 pages

Satel Versa IP User Manual - German - 45 pages

Satel Versa IP Installation Guide - German - 38 pages

Satel Versa IP Quick start guide - Dutch - 2 pages

Satel Versa IP User Manual - Dutch - 45 pages

Satel Versa IP Quick start guide - Dutch - 12 pages

Satel Versa IP Additional guide - Dutch - 93 pages

Satel Versa IP User Manual - Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info