629722
20
Zoom out
Zoom in
Previous page
1/36
Next page
18 VERSA IP SATEL
For the expanders identified by the control panel as CA-64 Ei and CA-64 EPSi, the EOL
resistor value is programmable within the range from 500 to 15 k (the sum of
programmable values must not exceed 15 k – see the PROGRAMMING manual).
If the resistor value in the expander is not programmable, in Single EOL configuration,
the 2.2 k
resistor is required, and in Double EOL (2EOL) configuration – two 1.1 k
resistors.
5.7 Connecting the sirens
It is recommended that the control panel be started without connected sirens. This will
prevent accidental triggering of the alarm after the control panel is started.
Depending on the siren type:
sirens without own power supply (e.g. SP-500, SP-4001, SP-4003, SPL-2010, SPW-100,
SPW-210, SPW-220) – high-current outputs are to be used to trigger the signaling,
sirens with own power supply (e.g. SP-4002, SP-4004, SP-4006, SP-6500, SPLZ-1011,
SD-3001, SD-6000) – it is recommended to use low-current outputs to trigger the
signaling, and high-current ones – to supply power.
Fig. 18. Connecting sirens to the control panel outputs. I – siren without own power supply.
II - siren with own power supply.
5.8 Connecting the radio monitoring transmitter
The O3 and O4 outputs of the control panel can be used for control of the NR2-DSC radio
monitoring transmitter (NEMROD system – format PC-16 OUT) manufactured by NOKTON.
In such a case, the SERIAL DATA ON OUT 3/4 global option must be enabled in the control
panel (see PROGRAMMING manual). Table 3 contains description of the connector contacts in
the NOKTON NR2-DSC transmitter, used for connecting to the VERSA IP control panel.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa IP in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa IP

Satel Versa IP Quick start guide - English - 11 pages

Satel Versa IP User Manual - English - 32 pages

Satel Versa IP User Manual - English - 43 pages

Satel Versa IP Additional guide - English - 93 pages

Satel Versa IP Quick start guide - German - 11 pages

Satel Versa IP Additional guide - German - 97 pages

Satel Versa IP User Manual - German - 45 pages

Satel Versa IP Installation Guide - German - 38 pages

Satel Versa IP Quick start guide - Dutch - 2 pages

Satel Versa IP User Manual - Dutch - 45 pages

Satel Versa IP Quick start guide - Dutch - 12 pages

Satel Versa IP Additional guide - Dutch - 93 pages

Satel Versa IP User Manual - Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info