699460
42
Zoom out
Zoom in
Previous page
1/87
Next page
40 VERSA SATEL
violation will block verification, and the zone restore will shorten the exit delay time. The
option is available, if the BLOCKS VERIFICATION option is enabled.
Alarm clearing – an option for the 13. ARM/DISARM and 15. DISARMING zone types. If the
option is enabled, together with disarming, the alarm is cleared (except for the tamper
alarms). Violation of the 15. DISARMING type zone will also clear the alarm, when the
system is not armed.
Store to event log – an option for the 12: NO ALARM ACTION zone type. If the option is
enabled, violation of the zone is saved into the event log (the way of saving the event
depends on the KEYBOX CONTROL option).
Store event only if armed – an option for the 12: NO ALARM ACTION zone type. If the option is
enabled, zone violations are saved in the event log when the partition to which the zone
belongs is armed. The option is available when the STORE TO EVENT LOG option is
enabled.
Keybox control – an option for the 12: NO ALARM ACTION zone type. If this option is enabled,
violation of the zone will result in logging an event which informs that the keybox is open.
The event code is sent to the monitoring station. If this option is disabled, an event will be
logged informing about zone violation, which will not be reported. The option is available
when the STORE TO EVENT LOG option is enabled.
LED
Name displayed on
LCD keypad
Options Zone type
1
Al.on exit end Alarm on exit delay end 0-10
2
Priority Priority all
3
Bypass disabled Bypass disabled all
4
Active night arm Active in night arm 0-4
5
Active day arm Active in day arm 0-4
6
Power up delay Power-up delay all
7
Warn.in part.arm Warning in partial arming 0-4
Warning on internal sirens 0-4
8
Warn.on int.sir.
Signaling on internal sirens 19
9
Auto-bypass 3 Auto-reset 3 0-10, 19
10
Auto-bypass 1 Auto-reset 1 0-10, 19
11
Autobypass reset Clearing Autoreset 0-10, 19
Armed if one part. armed 0-4
12
Arm.with one p.
Keybox control
12
Blocks verification 0, 1, 17
13
Disable verific.
Store to event log
12
Restore disarms 17
Restore disables verif. 17
Store event only if armed 12
14
Finish exit time
Alarm clearing 13, 15
Table 5. The method of presenting zone options on keypads. In graphic mode, the options in
the LCD keypad are numbered in the same way as in the LED keypad.
6.6 Hardware
Numbers of zones on the mainboard, in zone expanders and wireless system controllers may
overlap. If the zone numbers overlap, the state of only one of them will be supervised. Select
the zone that is to be supervised.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 5 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 5

Satel VERSA 5 Quick start guide - English - 11 pages

Satel VERSA 5 Installation Guide - English - 36 pages

Satel VERSA 5 User Manual - English - 32 pages

Satel VERSA 5 User Manual - English - 42 pages

Satel VERSA 5 Quick start guide - German - 11 pages

Satel VERSA 5 Additional guide - German - 89 pages

Satel VERSA 5 User Manual - German - 44 pages

Satel VERSA 5 Installation Guide - German - 37 pages

Satel VERSA 5 Quick start guide - German - 2 pages

Satel VERSA 5 Quick start guide - Dutch - 11 pages

Satel VERSA 5 User Manual - Dutch - 44 pages

Satel VERSA 5 Quick start guide - Dutch - 2 pages

Satel VERSA 5 Additional guide - Dutch - 86 pages

Satel VERSA 5 Installation Guide - Dutch - 35 pages

Satel VERSA 5 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info