699460
39
Zoom out
Zoom in
Previous page
1/87
Next page
SATEL VERSA 37
In case of the VIBRATION zone wiring, opening the circuit for 200 ms or longer –
irrespective of the programmed number of pulses and sensitivity (see below) – will be
interpreted as violation. This solution enables a magnetic contact to be connected in
series with the vibration detector.
Sensitivity – depending on selected wiring type:
NO, NC, EOL and 2EOL – the time during which the zone must be violated, so that it
can be noted by the control panel. The sensitivity is programmed in milliseconds.
Values from the 20 ms to 5100 ms range can be entered.
Vibration – the pulse whose duration is equal to or longer than the defined time will
cause violation of the zone. Values from the 3 ms to 96 ms range can be programmed
(every 3 ms).
Pulse validity – the time counted from the pulse occurrence during which subsequent pulses
must occur (their number being defined as the PULSE COUNT) so that the zone is violated.
The following values can be programmed: 30 s, 120 s, 240 s and 0. If no further pulses will
occur within the defined time period, the pulse counter will be reset. The pulse counter is
reset automatically at arming/disarming. If the value 0 is programmed, the counter will only
be reset at arming/disarming. This parameter is programmed for the ROLLER zone wiring.
Pulse count – the number of pulses after which the zone will be violated. This parameter is
programmed for the ROLLER and VIBRATION zone wiring. For the VIBRATION zone wiring, it is
possible to program values from 0 to 7 (for the value 0, the pulses will not be counted, the
SENSITIVITY parameter only being taken into account). For the ROLLER zone wiring, you can
program values from 1 to 8.
In the DLOADX program, all the required parameters for zones in ROLLER and
VIBRATION configuration are programmed in the “Sensitivity” field.
Max. violation time – if the zone is violated for the preset time (e.g. because the detector is
damaged or masked), a trouble will be reported. Up to 255 seconds can be programmed.
Programming the value 0 means that the control panel will not check whether the zone is
violated too long.
Max. no violation time – if zone is not violated for the preset time (e.g. because of
damaging or masking the detector), a trouble will be reported. When the zone is armed,
the countdown is not running. You can program up to 255 hours. Programming the value
0 means that the control panel will not check whether the zone is violated or not.
6.4 Zone types
0. ENTRY/EXIT – a delayed zone combining two functions:
entry – violation of the zone starts entry delay counting in the partition and turns on delay
for the 2. E
NTRY/EXIT ROUTE type zone.
exit – violation of the zone during exit delay countdown is equivalent to the partition exit.
1. ENTRY/EXIT FINAL – the same as the 0. ENTRY/EXIT type, but if the arming procedure has
started and the control panel registers the zone restore, the exit delay countdown will be
terminated.
2. ENTRY/EXIT ROUTE – during the countdown of ENTRY DELAY or DELAY ACTIVATION TIME the
zone acts as a delayed one (alarm will be triggered after expiry of the DELAY TIME). In other
situations it acts as an instant zone.
3. INSTANT – instant zone, which is already armed during exit delay countdown.
4. DOUBLE KNOCK – the zone triggers the burglary alarm only after the second violation. The first
violation of the zone only results in the “Zone violation” event being logged (the event to may
reported in format 4/2). The second violation must take place during the WAITING TIME
countdown.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 5 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 5

Satel VERSA 5 Quick start guide - English - 11 pages

Satel VERSA 5 Installation Guide - English - 36 pages

Satel VERSA 5 User Manual - English - 32 pages

Satel VERSA 5 User Manual - English - 42 pages

Satel VERSA 5 Quick start guide - German - 11 pages

Satel VERSA 5 Additional guide - German - 89 pages

Satel VERSA 5 User Manual - German - 44 pages

Satel VERSA 5 Installation Guide - German - 37 pages

Satel VERSA 5 Quick start guide - German - 2 pages

Satel VERSA 5 Quick start guide - Dutch - 11 pages

Satel VERSA 5 User Manual - Dutch - 44 pages

Satel VERSA 5 Quick start guide - Dutch - 2 pages

Satel VERSA 5 Additional guide - Dutch - 86 pages

Satel VERSA 5 Installation Guide - Dutch - 35 pages

Satel VERSA 5 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info