699460
31
Zoom out
Zoom in
Previous page
1/87
Next page
SATEL VERSA 29
Warning alarm on internal sirens – if the option is enabled, the warning alarm will be
signaled on outputs with the 2. INTERNAL SIREN function. The option is available, if the
WARNING ALARM option is enabled.
Tamper alarm always audibleif the option is enabled, the tamper alarm will be signaled
always on outputs with the 1. EXTERNAL SIREN and 2. INTERNAL SIREN functions (if the
option is disabled, only in armed mode). Also, lack of the expander is always saved in
the event log as a tamper alarm. If the option is disabled, lack of the expander will be
saved in the event log:
as a trouble, if the partition to which the expander is assigned, is disarmed (but the
keypad will signal tamper alarm anyway),
as a tamper alarm, if the partition is armed.
Tamper alarm on internal sirens – if the option is enabled, the tamper alarm will be
signaled always on outputs with the 2. INTERNAL SIREN function (in armed mode only if the
option is disabled). Additionally, the output will always signal lack of the expander (also
when the event is logged as a trouble – see: T
AMPER ALARM ALWAYS AUDIBLE option).
Block after 3 unknown codes/cards – if the option is enabled, after entering an incorrect
code / reading in an incorrect card three times, the keypad / proximity card arm/disarm
device will be blocked for 90 seconds. After this period of time has expired, each
subsequent entry of an incorrect code / read-in of an incorrect card will block the keypad /
proximity card arm/disarm device at once. The counter of incorrect codes / cards will be
reset after a correct code is used.
Service Mode from RESET pins – if the option is enabled, it is possible to start the service
mode and local programming “from pins”. You can enable/disable the option in keypad:
S
ERVICE MODE 0. SRVMOD CONFIG 6. SRVMOD OPT. SRVMOD VIA RESET.
Limit storing "Test transm." events – when the option is enabled, if the “Test transmission”
events directly follow one another, they are only written to the event log 3 times.
Information on sending next test transmissions is not recorded. Any other event occurring
in the system will reset the counter, i.e. it will be possible to log next three consecutive test
transmissions.
Backlight off on AC loss – when the option is enabled, the backlighting in keypads is
automatically switched off in case of 230 V AC power loss.
Answering/remote control when armed partition 1 / 2 – if the option is enabled, telephone
answering and remote control features are only available when selected partitions are
armed.
Additionally, the list of global options in the keypad includes:
TMP ALARM IN P.2 – alarm from the mainboard TMP zone is signaled in partition 2.
In the DLOADX program, the partition in whic
h alarm from TMP zone will be
signaled is to be selected in the “VERSA – Structure” window, “Hardware” tab, after
clicking on the system name on the left side,
EVENTS LIMITAT., EXP. RESTART. REP., REST. AFT. BELL and REST. AFT. DISARM. –
options available in the DLOADX program, “VERSA – Reporting” window, and
described in section “Reporting parameters and options” (p. 68).
4.3 Global times
Keypad’s alarm time – time period during which alarm is signaled in keypads and proximity
card arm/disarm devices. Up to 255 seconds can be programmed. Programming the value
0 means that the KEYPADS ALARM TIME will be 3 seconds.
No armed indication after – time counted from the moment of partition arming, after expiry
of which the keypad LED indicating the partition armed status will go out. Up to 255
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 5 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 5

Satel VERSA 5 Quick start guide - English - 11 pages

Satel VERSA 5 Installation Guide - English - 36 pages

Satel VERSA 5 User Manual - English - 32 pages

Satel VERSA 5 User Manual - English - 42 pages

Satel VERSA 5 Quick start guide - German - 11 pages

Satel VERSA 5 Additional guide - German - 89 pages

Satel VERSA 5 User Manual - German - 44 pages

Satel VERSA 5 Installation Guide - German - 37 pages

Satel VERSA 5 Quick start guide - German - 2 pages

Satel VERSA 5 Quick start guide - Dutch - 11 pages

Satel VERSA 5 User Manual - Dutch - 44 pages

Satel VERSA 5 Quick start guide - Dutch - 2 pages

Satel VERSA 5 Additional guide - Dutch - 86 pages

Satel VERSA 5 Installation Guide - Dutch - 35 pages

Satel VERSA 5 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info