699460
8
Zoom out
Zoom in
Previous page
1/87
Next page
6 VERSA SATEL
If the SERVICE MODE FROM RESET PINS option is disabled in the control panel then,
depending on the type of keypad in which the lowest address is set:
LCD: the , and LEDs of the second partition will be lit, and the message
“Restore factory settings ? 1=Yes” will come up on the display,
LED: the and LEDs of the second partition will be lit and the
LED will be
blinking rapidly.
Pressing the key will restore the factory default settings of the control panel,
thus making it possible to enter the service mode.
2.3 Navigating through the menu and running functions
2.3.1 Using the arrow keys
This method is only available in the LCD keypad.
1. Using the and keys, find the required submenu (the submenu indicating
cursor: ).
2. Press the or key to enter the submenu (use the key to return to the
previous menu/submenu, and the key to return to the main menu).
3. Repeat the steps 1 and 2 until the required function is found (the function indicating
cursor: ). Press or to start the function.
2.3.2 Using the digit shortcuts
Submenus and functions are numbered. In order to enter a submenu, just press the key with
number corresponding to the submenu number. In order to start a function, press the key
with number corresponding to the function number, and then . You can quickly start the
selected function by entering at once a sequence of some digits (corresponding to the
consecutive submenu numbers and the function number) and pressing .
For example, to start the expander identification function, press in turn the
keys, where:
- entering the 2. HARDWARE submenu,
- entering the 1. KPDS. & EXPS. submenu,
- running the 1. IDENTIFICAT. function.
In the LCD keypad, use the key to return from a submenu to the main menu or from a
function to a submenu, and use the key to return from a submenu to the previous
menu/submenu.
In the LED keypad, use the key to return to the main menu.
Remember that the sequence of digits which starts a function e.g. from the main menu
level will not start the same function from the submenu level.
2.4 “Step by step” programming method
In case of some functions (e.g. configuring the zones, outputs, expanders, etc.), the
programming is effected by using the “step by step” method. After calling the function and
selecting the item to be configured from the list, the first parameter available for programming
will be displayed. After pressing , you will go on to programming another parameter (if
you have entered some changes, they will be saved). Having programmed all parameters,
you will return to the submenu (LCD keypad) / main menu (LED keypad). The and
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 5 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 5

Satel VERSA 5 Quick start guide - English - 11 pages

Satel VERSA 5 Installation Guide - English - 36 pages

Satel VERSA 5 User Manual - English - 32 pages

Satel VERSA 5 User Manual - English - 42 pages

Satel VERSA 5 Quick start guide - German - 11 pages

Satel VERSA 5 Additional guide - German - 89 pages

Satel VERSA 5 User Manual - German - 44 pages

Satel VERSA 5 Installation Guide - German - 37 pages

Satel VERSA 5 Quick start guide - German - 2 pages

Satel VERSA 5 Quick start guide - Dutch - 11 pages

Satel VERSA 5 User Manual - Dutch - 44 pages

Satel VERSA 5 Quick start guide - Dutch - 2 pages

Satel VERSA 5 Additional guide - Dutch - 86 pages

Satel VERSA 5 Installation Guide - Dutch - 35 pages

Satel VERSA 5 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info