699460
30
Zoom out
Zoom in
Previous page
1/36
Next page
28 VERSA SATEL
8. Click on the “Write” button to write the new wireless device data to the controller (these
data will not be written after clicking on the button in the main menu).
LCD keypad
You can add ABAX wireless devices in the service mode by means of the NEW DEVICE
function (SERVICE MODE 2. HARDWARE 1. KPDS. & EXPS. 3. WIRELESS MOD. 1. NEW
DEVICE
).
1. Having started the function, enter the 7-digit serial number of the added device and press
the key. The serial number can be found on the electronics board or on the
enclosure. Each ARF-100 radio signal level tester has serial number 0000500.
2. When the “Open device tamper” message is displayed, depending on the device type:
ACX-200 / ACX-201: power-up the expander,
ARF-100: turn on the device,
ASW-100 E / ASW-100 F: insert the controller into 230 V AC socket,
other devices: open the tamper contact.
3. Information on the device to be added will be displayed (if nothing happens, it can mean
that you have entered an invalid serial number – if this is the case, press to return
to the submenu). Press to confirm your intention to add a device.
4. Using the and keys, select the zone to which the device is to be assigned
and then press .
5. The new name of the zone will be displayed. You can change it. The same name will also
be given to the output, if the device is assigned to the output. Press to save the
name. If the device takes up several positions, the name-giving procedure must be
repeated for them.
6. In the next steps, you can configure the device (see the PROGRAMMING manual).
5.14.2 Removing ABAX wireless devices
DLOADX program
You can remove ABAX wireless devices in the “VERSA – Structure” window, “Hardware” tab,
after clicking on the ABAX system controller name in the list of devices.
1. In the “Zones/Outputs” tab, click on the “Read” button to read the data related to wireless
devices from the controller.
2. Click on the zone to which the device you want to delete is assigned (if the device is
assigned to several zones, you can click on any of them).
3. Click on the “Delete”
button. The “Confirm” window will open.
4. Click on the “Yes” button. The “Confirm” window will close.
5. Click on the “Write” button to save the changes to the controller.
LCD keypad
You can remove ABAX wireless devices in the service mode by means of the REMOVE DEVICE
function (SERVICE MODE 2. HARDWARE 1. KPDS. & EXPS. 3. WIRELESS MOD. 3. REMOVE
DEVICE
).
1. Having started the function, use the
and keys to select the zone to which the
wireless device to be removed is assigned, and then press .
2. A prompt will appear asking you whether the device is to be deleted (device type and
serial number will be displayed). Press . The device will be deleted.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 5 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 5

Satel VERSA 5 Quick start guide - English - 11 pages

Satel VERSA 5 Additional guide - English - 87 pages

Satel VERSA 5 User Manual - English - 32 pages

Satel VERSA 5 User Manual - English - 42 pages

Satel VERSA 5 Quick start guide - German - 11 pages

Satel VERSA 5 Additional guide - German - 89 pages

Satel VERSA 5 User Manual - German - 44 pages

Satel VERSA 5 Installation Guide - German - 37 pages

Satel VERSA 5 Quick start guide - German - 2 pages

Satel VERSA 5 Quick start guide - Dutch - 11 pages

Satel VERSA 5 User Manual - Dutch - 44 pages

Satel VERSA 5 Quick start guide - Dutch - 2 pages

Satel VERSA 5 Additional guide - Dutch - 86 pages

Satel VERSA 5 Installation Guide - Dutch - 35 pages

Satel VERSA 5 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info