699460
14
Zoom out
Zoom in
Previous page
1/36
Next page
12 VERSA SATEL
Mounting the keypad
The keypads are designed for indoor installation. The place of installation should be readily
accessible to the system users.
1. Open the keypad enclosure.
2. Put the enclosure base on the wall and mark the location of mounting holes.
3. Drill the holes for wall plugs (screw anchors).
4. Run wires through the opening in the enclosure base.
5. Using wall plugs (screw anchors) and screws, fasten the enclosure base to the wall.
6. Connect the keypad terminals to the corresponding terminals of the control panel (see:
Fig. 5).
7. Close the keypad enclosure.
Fig. 5. Connecting keypads to the control panel.
5.5.2 Connecting Ethernet module
Fig. 6. Connecting the ETHM-1 Plus module to the control panel.
One ETHM-1 Plus or ETHM-1 module can be connected to the control panel. It allows
reporting of events and programming of the control panel via the Ethernet network.
Additionally, the ETHM-1 Plus module makes possible notification of events by means of
e-mail messages as well as operation of the alarm system from mobile devices by means of
VERSA CONTROL application.
Address 4 (04h) must be set in the Ethernet module.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 5 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 5

Satel VERSA 5 Quick start guide - English - 11 pages

Satel VERSA 5 Additional guide - English - 87 pages

Satel VERSA 5 User Manual - English - 32 pages

Satel VERSA 5 User Manual - English - 42 pages

Satel VERSA 5 Quick start guide - German - 11 pages

Satel VERSA 5 Additional guide - German - 89 pages

Satel VERSA 5 User Manual - German - 44 pages

Satel VERSA 5 Installation Guide - German - 37 pages

Satel VERSA 5 Quick start guide - German - 2 pages

Satel VERSA 5 Quick start guide - Dutch - 11 pages

Satel VERSA 5 User Manual - Dutch - 44 pages

Satel VERSA 5 Quick start guide - Dutch - 2 pages

Satel VERSA 5 Additional guide - Dutch - 86 pages

Satel VERSA 5 Installation Guide - Dutch - 35 pages

Satel VERSA 5 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info