699458
44
Zoom out
Zoom in
Previous page
1/87
Next page
42 VERSA SATEL
The way of signaling the tamper alarms by the outputs with functions 1. EXTERNAL
SIREN and 2. INTERNAL SIREN depends on the global options TAMPER ALARM ALWAYS
AUDIBLE and TAMPER ALARM ON INTERNAL SIRENS.
3. BURGLARY – signals the alarms from 0 to 5 type zones.
4. FIRE ALARM – signals the fire alarms from keypad and from 10. 24H FIRE type zones.
5. “DURESS” ALARM – signals that code with DURESS right was used for arming/disarming or
alarm clearing.
6. PANIC ALARM – signals the panic alarms from keypad and from 7. 24H PANIC type zones.
7. AUX. ALARM – signals the medical assistance call alarms triggered from keypad and from
9. 24H MEDICAL type zones.
8. ALARM NOT VERIFIED – signals the unverified alarms.
9. ALARM - VERIFIED – signals the verified alarms.
10. TAMPER ALARM – signals the tamper alarms.
11. FIRE DETECTORS POWER SUPPLY – the dedicated output for power supply of the fire
detectors with automatic verification alarm. After violation of the fire zone the output will be
disabled for 16 seconds. If, after the power is turned on again, another violation from the
fire zone occurs, the fire alarm will be triggered.
12. POWER SUPPLY ON ARMED – the dedicated output for power supply of the detectors which
should not be active when the system is disarmed. It gets activated at the moment of
starting the arming procedure (the exit delay is not taken into account).
13. ZONE VIOLATION – signals violation of the zones.
14. CHIME – signals violation of the zones when they are disarmed.
15. CONTROLLED – controlled by means of zones, timers, keypad or from keyfob.
16. READY STATUS – indicates whether the system is ready for arming, i.e. whether there are
no violated zones (active when there is no violation).
17. EXIT DELAY STATUS – indicates that the EXIT DELAY countdown is running.
18. ARMED STATUS – indicates the armed mode (after completion of the exit delay countdown).
19. TROUBLE STATUS – indicates troubles.
20. A
LARM/ARM STATUS – indicates alarms (pulsating mode) and arm status (continuous mode
– after end of the exit delay countdown).
21. D
ETECTORS RESETTING – dedicated output to control the alarm memory reset in detectors.
Activated at the moment of starting the arming procedure (the exit delay is not taken into
account). It can also be activated by using the OUTPUTS RESET user function.
22. ETHM
TROUBLE STATUS – indicates Ethernet module troubles.
7.3 Output parameters
Output name – individual name of the output (up to 16 characters).
Cut-off time – time during which the alarm outputs and the outputs with functions 13. ZONE
VIOLATION
, 14. CHIME, 15. CONTROLLED and 21. DETECTORS RESETTING are active. Entering
the value 0 modifies the way of functioning of some outputs:
alarm outputs remain active until the alarm is cleared,
– the 13. ZONE VIOLATION output remains active throughout the time of zone violation (the
PULSE option is disabled then),
– the 14. C
HIME output remains active until deactivated by the OUTPUTS RESET user
function,
– the 15. C
ONTROLLED output remains active until another violation of the controlling zone,
disabling of timer or disabling of the output by means of keypad (bistable mode).
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 15 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 15

Satel VERSA 15 Quick start guide - English - 11 pages

Satel VERSA 15 Installation Guide - English - 36 pages

Satel VERSA 15 User Manual - English - 32 pages

Satel VERSA 15 User Manual - English - 42 pages

Satel VERSA 15 Additional guide - German - 11 pages

Satel VERSA 15 User Manual - German - 44 pages

Satel VERSA 15 Installation Guide - German - 37 pages

Satel VERSA 15 Quick start guide - German - 2 pages

Satel VERSA 15 Quick start guide - Dutch - 11 pages

Satel VERSA 15 User Manual - Dutch - 44 pages

Satel VERSA 15 Quick start guide - Dutch - 2 pages

Satel VERSA 15 Additional guide - Dutch - 86 pages

Satel VERSA 15 Installation Guide - Dutch - 35 pages

Satel VERSA 15 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info