699458
35
Zoom out
Zoom in
Previous page
1/87
Next page
SATEL VERSA 33
Verification time – programming a value different from 0 means activating the alarm
verification feature in the partition. Subject to verification are alarms from 0 to 5 type
zones. The VERIFICATION TIME runs from the moment of alarm being triggered by such a
zone. If during the VERIFICATION TIME an alarm is triggered by another zone in the partition,
programmed as 0 to 5 type, the control panel will report a verified alarm. The time is
programmed in minutes. Up to 255 minutes can be programmed.
Entry delay in Day Arm – with this option enabled, after partition is armed in day mode with
no delay, the entry delay time remains valid (there is only no exit delay time). With this
option disabled, after partition is armed with no delay, there is neither exit delay nor entry
delay time.
Entry delay in Night Arm – with this option enabled, after partition is armed in night mode
with no delay, the entry delay time remains valid (there is only no exit delay time). With this
option disabled, after partition is armed with no delay, there is neither exit delay nor entry
delay time.
Auto-arming delay – the time counted from the moment when the timer is to arm the
partition, enabling the arming to be deferred. The delay time is programmed in seconds.
Up to 255 seconds can be programmed. Programming the value 0 means that the arming
deferment will be unavailable.
Deferment time – the time by which the user can defer arming by the timer. The time is
programmed in minutes. Up to 255 minutes can be programmed. Programming the value 0
means that the arming deferment will be unavailable.
Simple deferment – if the option is enabled, the user can defer auto-arming by pressing the
key twice during the auto-arm delay time countdown.
Single deferment – if the option is enabled, the user can only use the simple deferment
once, so as to postpone the auto-arming. Subsequent arming deferments are only
possible by using the A-ARM DEFER. user function ([CODE] 6. SETTINGS 1. A-ARM
DEFER
.).
Timer priority – if this option is enabled, the timer always disarms the system (if the option is
disabled, the timer will only disarm the system, if it armed it).
6. Zones
A zone can be assigned to one or two partitions. If the zone is assigned to two partitions, it
can be armed when both partitions are armed or one of them only.
The system supports the following zones:
hardwired – on the control panel PCB and in expanders. The number of available
hardwired zones is determined by the control panel during the identification procedure.
wireless – after connecting the 433 MHz wireless system controller (VERSA-MCU) or the
ABAX wireless system controller (ACU-120, ACU-270, ACU-100 or ACU-250). The
number of available wireless zones depends on the number of wireless devices registered
in the system and is determined during the procedure of adding them.
virtual – zones which do not physically exist, but are controlled by means of keyfobs.
6.1 Programming the EOL resistor values
For the zones on the control panel mainboard and in zone expanders identified by the control
panel as CA-64 Ei and CA-64 EPSi, the value of end-of-line resistors is programmable within
the range from 500 to 15 k.
You can define the resistor value for the control panel zones:
DLOADX program: “VERSA – Structure” window “Hardware” tab [main board],
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 15 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 15

Satel VERSA 15 Quick start guide - English - 11 pages

Satel VERSA 15 Installation Guide - English - 36 pages

Satel VERSA 15 User Manual - English - 32 pages

Satel VERSA 15 User Manual - English - 42 pages

Satel VERSA 15 Additional guide - German - 11 pages

Satel VERSA 15 User Manual - German - 44 pages

Satel VERSA 15 Installation Guide - German - 37 pages

Satel VERSA 15 Quick start guide - German - 2 pages

Satel VERSA 15 Quick start guide - Dutch - 11 pages

Satel VERSA 15 User Manual - Dutch - 44 pages

Satel VERSA 15 Quick start guide - Dutch - 2 pages

Satel VERSA 15 Additional guide - Dutch - 86 pages

Satel VERSA 15 Installation Guide - Dutch - 35 pages

Satel VERSA 15 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info