699459
29
Zoom out
Zoom in
Previous page
1/36
Next page
SATEL VERSA 27
5.14.1 Adding new ABAX wireless devices
The control panel can support up to 30 wireless devices. The number of actually supported
devices depends on how many positions the individual devices occupy. Each position means
one wireless zone or one wireless zone and one wireless output.
If a device occupies two or more positions, its addition will respectively decrease the number
of wireless devices that can still be registered (e.g. after adding a ACX-200 expander, which
takes up 4 positions, the controller can still support 26 other wireless devices).
Even if a device occupies several zones in the system, only the first of them should be
indicated during the device adding procedure. The next ones are assigned automatically
(these are the zones following the selected one).
For some wireless devices, you can select whether the device will take up one or two
positions (channels) on the list of devices. Depending on the device, if one position is
selected:
AMD-101 – only additional NC input will be supported,
AMD-102 – only additional inputs (roller shutter and NC) will be supported;
AOD-200 – only the motion detector will be supported;
AVD-100 – only the vibration detector will be supported.
If the device occupies an output as well, its number will be the same as the number of zone
selected during the device adding procedure.
The control panel does not support wireless outputs with numbers from 13 to 30.
DLOADX program
You can add ABAX wireless devices in the “VERSA – Structure” window, “Hardware” tab,
after clicking on the ABAX system controller name in the list of devices.
1. In the “Zones/Outputs” tab, click on the “Read” button to read the data related to wireless
devices from the controller (these data are not read after clicking on the button in
the main menu).
2. Click on the zone to which a new wireless device is to be assigned (you can also select
the zone later in the “New wireless dev.” window).
3. Click on the “New device” button. The “New wireless dev.” window will open.
4. Enter the 7-digit serial number of the added device. The serial number can be found on
the electronics board or on the enclosure. Each ARF-100 radio signal level tester has
serial number 0000500.
5. Depending on the device type:
ACX-200 / ACX-201: power-up the expander,
ARF-100: turn on the device,
ASW-100 E / ASW-100 F: insert the controller into 230 V AC socket,
other devices: open the tamper contact.
6. The message will confirm that a new device has been added (unless you have entered an
invalid serial number, of which you will be informed by a message). The new zone name
will be displayed. You can change it. The same name will also be given to the output, if
the device is assigned to the output.
7. Click on the “OK” button (you can click on the “Quit” button to cancel adding a new device
or on the “Next” button to proceed to adding a next wireless device).
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 10 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 10

Satel VERSA 10 Quick start guide - English - 11 pages

Satel VERSA 10 Additional guide - English - 87 pages

Satel VERSA 10 User Manual - English - 32 pages

Satel VERSA 10 User Manual - English - 42 pages

Satel VERSA 10 Quick start guide - German - 11 pages

Satel VERSA 10 Additional guide - German - 89 pages

Satel VERSA 10 User Manual - German - 44 pages

Satel VERSA 10 Installation Guide - German - 37 pages

Satel VERSA 10 Quick start guide - German - 2 pages

Satel VERSA 10 Quick start guide - Dutch - 11 pages

Satel VERSA 10 User Manual - Dutch - 44 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages

Satel VERSA 10 Additional guide - Dutch - 86 pages

Satel VERSA 10 Installation Guide - Dutch - 35 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info