699459
26
Zoom out
Zoom in
Previous page
1/36
Next page
24 VERSA SATEL
5.10.5 First steps after starting-up the control panel
Having started the control panel with factory defaults:
1. Set individual, correct addresses in the keypads.
2. Run the identification function for devices connected to the communication bus of the
control panel.
Programming the control panel settings will only be possible after completion of the above
steps.
5.11 Programming addresses for the hardwired keypads
Each keypad connected to the control panel must have an individual address set within the
0 to 5 range. By default, address 0 is set in all wired keypads. When started with factory
default settings, the control panel will support all keypads connected to the bus, irrespective
of what addresses are set in them. Thus it is possible to set correct individual addresses in
the keypads.
Remember to program an individual address if a new keypad is connected to the
already functioning alarm system.
5.11.1 Programming the address by means of the service function
The address programming function can be started from either a wired or wireless
keypad, but it will only allow setting addresses in the wired keypads.
1. Enter the service code (by default 12345) and press the key.
2. Press in turn the keys. The service mode will start.
3. Press in turn the
keys. The KEYPADS ADDR. function will start. All
LEDs designated with icons will start blinking in keypads and information on the current
address will be presented by means of:
LCD: displayed message – see Fig. 26,
LED: rapid blinking of the LED designated with the number corresponding to the keypad
address (for address 0 – LED 30) – see Fig. 27.
n=0...5 currently set keypad
address
Fig. 26. Programming LCD keypad address.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 10 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 10

Satel VERSA 10 Quick start guide - English - 11 pages

Satel VERSA 10 Additional guide - English - 87 pages

Satel VERSA 10 User Manual - English - 32 pages

Satel VERSA 10 User Manual - English - 42 pages

Satel VERSA 10 Quick start guide - German - 11 pages

Satel VERSA 10 Additional guide - German - 89 pages

Satel VERSA 10 User Manual - German - 44 pages

Satel VERSA 10 Installation Guide - German - 37 pages

Satel VERSA 10 Quick start guide - German - 2 pages

Satel VERSA 10 Quick start guide - Dutch - 11 pages

Satel VERSA 10 User Manual - Dutch - 44 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages

Satel VERSA 10 Additional guide - Dutch - 86 pages

Satel VERSA 10 Installation Guide - Dutch - 35 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info