699459
15
Zoom out
Zoom in
Previous page
1/42
Next page
SATEL VERSA 13
“Bypassed zones 1=Arm” – if you don’t have the ZONE INHIBITION right. You can:
– press the key to cancel the arming,
– press the key to proceed with the arming.
6.3.7 Denial of arming and forced arming
The installer can configure the control panel so that initiating the arming procedure is
impossible, if:
in the partition to be armed, at least one zone that must not be violated during arming (the
PRIORITY option has been enabled for the zone by the installer) is violated,
in the partition to be armed, at least one alarm zone is violated beyond the exit route,
there is trouble in the system.
If you have the INSPECTION right, you will be informed about the cause of refusal to arm the
system (the order of message descriptions corresponds to their priority):
“Zone [zone number] violat.” – a zone with enabled PRIORITY option is violated. If two or
more such zones are violated, the indicator will be flashing on the display. To scroll
through the list of violated zones, use the and keys. You can:
– press the key to cancel the arming,
– press the key to inhibit the violated zone (you must have the ZONE INHIBITION
right). A message will be displayed, prompting you to confirm the command to inhibit the
zone (press to inhibit the zone, or to cancel inhibiting the zone).
The system can be armed after eliminating the cause of the zone violation, or after
bypassing the zone.
“Violated zones 1=Ok 2=Check” – an alarm zone outside of the exit route is violated. You
can:
– press the key to cancel the arming,
– press the key to force the arming,
– press the key to check which zone is violated. If two or more such zones are
violated, the indicator will be flashing on the display. To scroll through the list of
violated zones, use the
and keys. If you have the ZONE INHIBITION
permission, you will be able inhibit the violated zone by pressing . A message will
be displayed, prompting you to confirm the command to inhibit the zone (press to
inhibit the zone, or to cancel inhibiting the zone).
“Troubles 1=Ok 2=Check” – there is a trouble in the system. You can:
– press the key to cancel the arming,
– press the key to force the arming,
– press the key to view the trouble log – the 7. SYSTEM STATE function will start
(see: “Checking the troubles / system state” p. 30).
Information on the forced arming is written into the event log.
6.3.8 Failure of arming procedure
The installer can configure the alarm system in such a manner that it will not be armed, if at
the moment of completing the exit delay countdown:
there is a violated zone in partition which was not violated when the arming procedure was
started,
there is a trouble which did not exist when the arming procedure was started.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 10 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 10

Satel VERSA 10 Quick start guide - English - 11 pages

Satel VERSA 10 Additional guide - English - 87 pages

Satel VERSA 10 Installation Guide - English - 36 pages

Satel VERSA 10 User Manual - English - 32 pages

Satel VERSA 10 Quick start guide - German - 11 pages

Satel VERSA 10 Additional guide - German - 89 pages

Satel VERSA 10 User Manual - German - 44 pages

Satel VERSA 10 Installation Guide - German - 37 pages

Satel VERSA 10 Quick start guide - German - 2 pages

Satel VERSA 10 Quick start guide - Dutch - 11 pages

Satel VERSA 10 User Manual - Dutch - 44 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages

Satel VERSA 10 Additional guide - Dutch - 86 pages

Satel VERSA 10 Installation Guide - Dutch - 35 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info