699902
2
Zoom out
Zoom in
Previous page
1/4
Next page
2 RE-1K • RE-2K SATEL
Terminals
SS - output signaling the activation of the relay output (turning the relay on in the
pulse and monostable modes; switching the relay over in the bistable mode).
The indication is provided in the form of three short (0.16 second) pulses. OC
type output (shorted to common ground when active). You can connect e.g.
a siren to the SS output.
+12V - power input (9...16 V DC).
COM - common ground.
TMP - NC type tamper output (opening the tamper switch opens the output). You can
connect the TMP output to the appropriately programmed output of the alarm
control panel.
C1, C2 - relay output common contact.
NC1, NC2 - relay output normally closed contact.
NO1, NO2 - relay output normally open contact.
Note: The RE-1K controller has no terminals of relay output 2.
3. Keyfobs
The controller supports the following SATEL 433 MHz keyfobs:
MPT-300 – 5-button keyfob,
T-4 – 4-button keyfob,
T-2 – 2-button keyfob,
T-1 – 1-button keyfob,
P-4 – 4-button keyfob,
P-2 – 2-button keyfob.
The controller is delivered with two T-2 keyfobs.
3.1 Keyfob battery replacement
The battery life depends on how the keyfob is used. The more frequently the buttons are
pressed, the faster the battery drains. When the controller indicates that the battery is running
low (LED; LV output), replace the battery as soon as possible.
There is a danger of battery explosion when using a different battery than
recommended by the manufacturer, or handling the battery improperly.
Be particularly careful during installation and replacement of the battery. The
manufacturer is not liable for the consequences of incorrect installation of the
battery.
The used batteries must not be discarded, but should be disposed of in
accordance with the existing rules for environment protection.
4. Installation
Disconnect power before making any electrical connections.
Changes, modifications or repairs not authorized by the manufacturer shall void your rights
under the warranty.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel RE-2K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel RE-2K in the language / languages: English as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel RE-2K

Satel RE-2K User Manual - German - 4 pages

Satel RE-2K User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info