699526
34
Zoom out
Zoom in
Previous page
1/49
Next page
32 PERFECTA SATEL
– 13. Z
ONE VIOLATION
output will be active when the zone is violated,
– 15. C
ONTROLLED
output will remain active until repeated zone violation, stopping timer or
deactivating from keypad, etc.
Triggering zones [43.Zones] – the zones whose status has effect on the output status.
Arming modes [43.Zones] – arming modes which affect the output status.
Troubles [43.Zones] – troubles during which the output is active.
Assigned to part. 1 [451.P.1 outputs] – if this option is enabled, the output is controlled by
events related to partition 1 (alarm in partition 1, clearing alarm in partition 1 etc.).
Assigned to part. 2 [452.P.2 outputs] – if this option is enabled, the output is controlled by
events related to partition 2 (alarm in partition 2, clearing alarm in partition 2 etc.).
Polarity + [453.Polarity(+)] – the option defines how the outputs will operate (see the table
below). If the option is disabled, the output is inverted. The option does not apply to
wireless outputs.
“–” terminal of high-current output / low-current output
option enabled
(normal polarity)
option disabled
(reverse polarity)
output inactive
disconnected from ground shorted to ground
output active
shorted to ground disconnected from ground
Table 2. Mode of output operation depending on the P
OLARITY
+ option.
Pulsed [454.Pulsed] – if this option is enabled, the output is pulsating when it is active. The
option does not apply to the 1. E
XTERNAL SIREN
, 2. I
NTERNAL SIREN
, 11. F
IRE DETECTORS
P
OWER SUPPLY
and 20. A
RM
/
ALARM STATUS OUTPUTS
. The option does not apply to wireless
outputs.
Arm/Disarm/clear sign. [455.Arm/Dis/Clr] – if this option is enabled, the output will signal:
– starting the arming procedure (if the exit delay time is 0, the system is armed
immediately) – 1 pulse,
disarming – 2 pulses,
clearing alarm – 4 pulses,
denial of arming or arming procedure failure – 7 pulses.
The signaling is triggered if a keyfob or zone is used to arm / disarm the system or clear
alarm. Pulse duration is about 0.3 second. Option for the 1. E
XTERNAL SIREN
, 2. I
NTERNAL
SIREN
, 3. B
URGLARY
, 4. FIRE
ALARM
, 5. DURESS
ALARM
, 6. PANIC
ALARM
, 7. MEDICAL
ALARM
, 8. A
LARM
-
NOT VERIFIED
, 9. A
LARM
-
VERIFIED
and 10. T
AMPER ALARM
outputs.
Triggering timers [44.Timers] – the output control timers (starting the timer activates the
output). The parameter refers to the 15. C
ONTROLLED
output.
7.3 Quick control of outputs
If the quick control of the outputs 15. C
ONTROLLED
is to be available in keypads, the outputs
of this type must be assigned to the corresponding keypad keys. One output can be assigned
to each number key.
7.4 Wireless siren PERFECTA 16-WRL / PERFECTA 32-WRL
If a wireless siren is assigned to the output, additional parameters and options are available
(outputs 13-16).
Filter [1272.Filter] – time counted from the moment of receiving transmission from the siren.
After it has elapsed and no other transmission is received, trouble will be reported.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel PERFECTA 32-WRL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel PERFECTA 32-WRL in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel PERFECTA 32-WRL

Satel PERFECTA 32-WRL Quick start guide - English - 10 pages

Satel PERFECTA 32-WRL User Manual - English - 31 pages

Satel PERFECTA 32-WRL Additional guide - English - 50 pages

Satel PERFECTA 32-WRL Installation Guide - English - 27 pages

Satel PERFECTA 32-WRL Quick start guide - German - 11 pages

Satel PERFECTA 32-WRL User Manual - German - 32 pages

Satel PERFECTA 32-WRL Additional guide - German - 52 pages

Satel PERFECTA 32-WRL Additional guide - German - 50 pages

Satel PERFECTA 32-WRL Installation Guide - German - 28 pages

Satel PERFECTA 32-WRL Quick start guide - Dutch - 11 pages

Satel PERFECTA 32-WRL User Manual - Dutch - 32 pages

Satel PERFECTA 32-WRL Additional guide - Dutch - 52 pages

Satel PERFECTA 32-WRL Additional guide - Dutch - 50 pages

Satel PERFECTA 32-WRL Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info