699544
5
Zoom out
Zoom in
Previous page
1/47
Next page
SATEL PERFECTA LTE 3
1. Introduction
You can configure the PERFECTA LTE alarm system by using:
a computer running the PERFECTA
S
OFT
program (locally or remotely),
a keypad.
The control panel can be configured when the A
CTIVE
option is enabled (see U
SER MANUAL
).
As required by the standards, the service access after completion of the installation
has to be limited by the administrators.
Names of parameters and options from the PERFECTA
S
OFT
program are used in this
manual. At the description of each parameter or option, you will find one of the following data
in square brackets:
name of the function which is used for configuring a parameter or option on the keypad,
name of a parameter or option from the keypad.
2. Configuring the system by using keypad
You can configure the alarm system by using functions available in the service mode menu.
When the control panel is running in service mode, tamper alarms are not
generated.
2.1 Starting the service mode
1. Enter the service code (by default: 12345) and press .
2. User menu appears.
3. Press .
4. When the cursor shows the S
ERVICE MODE
function, press .
5. Service mode menu will be displayed (the
cursor will show the E
ND
SM function).
2.2 Starting the service mode “from pins”
When entering the service mode in the normal way is not possible (the control panel does not
support keypads, does not accept the service code, etc.), you can use the emergency
procedure, so-called, starting “from pins”.
1. Turn off the control panel power supply (first disconnect the AC power, and then the
battery).
2. Put a jumper on the RESET pins on the control panel mainboard.
3. Turn on the control panel power supply (first connect the battery and then the AC power).
4. Wait a few seconds (until LEDs next to the RESET pins stop flashing) and remove the
jumper from the RESET pins. The control panel will enter the service mode. The service
mode menu will be displayed on the wired keypad with the lowest address.
If there is no wired keypad in the alarm system or there is no communication with the
wired keypads (e.g. when the communication bus is shorted), you can get access to
the service mode menu from the wireless keypad with the lowest address. Press any
key on this keypad within 30 seconds of removing jumper from the RESET pins.
The service mode menu will not be displayed, if the D
ISABLE
S
ERVICE
M
ODE
option is
enabled in the control panel. The “Factory settings ? 1=Yes” message will be
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel PERFECTA 32-WRL LTE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel PERFECTA 32-WRL LTE in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel PERFECTA 32-WRL LTE

Satel PERFECTA 32-WRL LTE Quick start guide - English - 10 pages

Satel PERFECTA 32-WRL LTE User Manual - English - 30 pages

Satel PERFECTA 32-WRL LTE Additional guide - English - 50 pages

Satel PERFECTA 32-WRL LTE Installation Guide - English - 26 pages

Satel PERFECTA 32-WRL LTE Quick start guide - German - 11 pages

Satel PERFECTA 32-WRL LTE User Manual - German - 32 pages

Satel PERFECTA 32-WRL LTE Additional guide - German - 50 pages

Satel PERFECTA 32-WRL LTE Installation Guide - German - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info