699537
13
Zoom out
Zoom in
Previous page
1/30
Next page
SATEL PERFECTA LTE 11
accompanying the exit delay countdown). When setting the partition to one of the above-
mentioned armed modes, hold down the armed mode selection key ( , or ) for
about 3 seconds. The exit delay countdown will not run.
6.3.5 Terminating the exit delay countdown
When the exit delay countdown is running, you can terminate it, thus shortening the exit
delay time. Press and hold down , or for about 3 seconds (it is of no
consequence which key you will press).
6.3.6 Service mode and arming
If you try to arm the system when the service mode is active, you will be informed about it by
a message displayed on the keypad. Press if you want to arm the system.
6.3.7 System problems and arming failure
The alarm system can be configured so that the control panel will perform a check during
arming for any problems preventing the system from being armed. The possible problems
that prevent arming are given below:
at least one zone that must not be violated during arming (the PRIORITY option has been
enabled for the zone by the installer) is violated in the partition,
at least one alarm zone is violated beyond the exit route in the partition,
a zone is bypassed in the partition,
there is tamper in the partition,
there is trouble in the system.
The check can be performed twice:
before starting the arming procedure,
after the exit delay countdown expires.
System not ready and forced arming
If you are trying to arm a partition, but the arming procedure fails to start and the “System not
ready” message is displayed instead, there are some problems in the system that prevent it
from being armed.
When the “System not ready 1=Arm 2=Check” message is displayed, you can:
press to cancel the arming,
press to force the arming,
press to check what has prevented the arming procedure from starting.
When the “System not ready 2= Check” message is displayed, you can:
press to cancel the arming,
press to check what has prevented the arming procedure from starting.
If forced arming is not available, you will be able to arm the system only after the
causes that made starting of the arming procedure impossible are eliminated.
List of problems
If, after pressing , it turns out there are several causes that prevent arming, you can
scroll the list using the
or keys.
If you want to bypass a violated zone or unbypass a bypassed zone, press
(you need
to have the ZONE INHIBITION right). A prompt will appear asking you whether to execute the
function. Press to confirm or to deny.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel PERFECTA 32 LTE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel PERFECTA 32 LTE in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel PERFECTA 32 LTE

Satel PERFECTA 32 LTE Quick start guide - English - 10 pages

Satel PERFECTA 32 LTE Additional guide - English - 47 pages

Satel PERFECTA 32 LTE Additional guide - English - 50 pages

Satel PERFECTA 32 LTE Installation Guide - English - 26 pages

Satel PERFECTA 32 LTE User Manual - German - 11 pages

Satel PERFECTA 32 LTE Additional guide - German - 50 pages

Satel PERFECTA 32 LTE Installation Guide - German - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info