699537
15
Zoom out
Zoom in
Previous page
1/26
Next page
SATEL PERFECTA LTE 13
2EOL/NC – wiring configuration that is recommended when connecting a detector with NC
alarm output and tamper output. Two EOL resistors must be used in the circuit. The
zone can distinguish between 3 states: normal, alarm and tamper.
2EOL/NO – wiring configuration similar as 2EOL/NC, but for detectors with the NO alarm
output.
Shutter – wiring configuration that allows connecting a roller shutter detector.
Vibration – wiring configuration that allows connecting a vibration detector. You can also
connect to the zone a detector with NC alarm output (e.g. vibration detector and
magnetic contact can be connected in series).
Fig. 12. The ways to connect detectors to zones. The detector outputs are designated with
letters: A – alarm, T – tamper.
End-of-line resistors
For the Single EOL configuration, use a 2.2 k resistor to close the circuit. For the Double
EOL (2EOL) configuration, use two 1.1 k resistors.
6.7 Connecting the sirens
It is recommended that the control panel be started without connected sirens. This will
prevent accidental triggering of the alarm after the control panel is started.
Depending on the siren type:
sirens without own power supply (e.g. SP-500, SP-4001, SP-4003, SPL-2010, SPW-100,
SPW-210, SPW-220) – high-current outputs are to be used to trigger the signaling,
sirens with own power supply (e.g. SP-4002, SP-4004, SP-4006, SP-6500, SPLZ-1011,
SD-3001, SD-6000) – it is recommended to use low-current outputs to trigger the
signaling, and high-current ones – to supply power.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel PERFECTA 32 LTE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel PERFECTA 32 LTE in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel PERFECTA 32 LTE

Satel PERFECTA 32 LTE Quick start guide - English - 10 pages

Satel PERFECTA 32 LTE User Manual - English - 30 pages

Satel PERFECTA 32 LTE Additional guide - English - 47 pages

Satel PERFECTA 32 LTE Additional guide - English - 50 pages

Satel PERFECTA 32 LTE User Manual - German - 11 pages

Satel PERFECTA 32 LTE Additional guide - German - 50 pages

Satel PERFECTA 32 LTE Installation Guide - German - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info