699464
6
Zoom out
Zoom in
Previous page
1/31
Next page
4 PERFECTA SATEL
4. Glossary
Al he alarm system to detection by the detectors of an intruder in the
Co
Da which only some zones in the partition are armed, as
De e basic component of alarm system, which analyzes the environment and, if
tic contacts on opening the
rtition,
es the
Me
Ni e status in which only some zones in the partition are armed, as
protected area, but there is no risk of the zones being violated by the user at
Pa keypad, in case of
Pr ectors being part of the alarm system.
ut occurrence of an event can be transmitted via GSM/GPRS. The
arm – reaction of t
protected area, or to another event within the protected area (e.g. glass pane break, gas
detection, etc.). The alarm can be signaled in keypads or by sirens (during a defined time
or until cleared). Additionally, information on the alarm can be sent to the monitoring
station or the user.
Alarm zone – the zone whose violation can result in the alarm being triggered. The alarm
zones can be either instant (violation will trigger the alarm at once) or delayed (violation
will only trigger the alarm after a defined period of time has elapsed, e.g. the entry delay).
Armed mode – the status of alarm system in which zone violation will trigger the alarm.
de – a sequence of digits that allows the user to operate the alarm system by using
keypad.
y armed mode – the status in
selected by the installer. The installer should indicate the zones to be armed when a user
stays in the protected area, but there is no risk of the zones being violated by the user
during the daytime. If no such zones are indicated by the installer, the user will not be able
to arm the partition in this mode.
tector – th
a situation recognized as a threat occurs, transmits appropriate information to the control
panel (e.g. motion detectors on registering motion, magne
door/window, glass-break detectors on breaking glass pane, gas detectors on sensing
gas, etc.).
Entry delay – time counted from the moment of entry into the protected area, which makes it
possible to disarm the partition before the alarm is triggered.
Entry route – the route which the user must have to follow after entry into the protected area
before being able to disarm the system. It is usually the same as the exit route.
Exit delay – time counted from the moment of starting the arming procedure in the pa
which makes it possible to leave the protected area before the alarm is triggered.
ore he leavExit route – the route which the user must have to take after arming bef
protected area. It is usually the same as the entry route.
Fire alarm – alarm triggered by fire detectors, or from the keypad, in the event of fire.
Full armed mode – the status in which all zones belonging to the partition are armed.
Installer – the person who has installed and configured the alarm system.
dical (auxiliary) alarm – alarm triggered by means of a button, or from the keypad, if it is
necessary to call the medical assistance.
ght armed mode – th
selected by the installer. The installer should indicate the zones to be armed when a user
stays in the
night. If no such zones are indicated by the installer, the user will not be able to arm the
partition in this mode.
nic alarm – alarm triggered by means of the panic button, or from the
a hold-up.
Partition – a part of the protected area, composed of a number of zones. The division into
partitions makes it possible to limit the access to part of the premises to some selected
users, and to arm/disarm the system only in part of the protected area.
otected area – the area supervised by det
Reporting – reporting events that occurred in the alarm system to the monitoring station. The
information abo
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel PERFECTA 16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel PERFECTA 16 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel PERFECTA 16

Satel PERFECTA 16 Quick start guide - English - 10 pages

Satel PERFECTA 16 Additional guide - English - 49 pages

Satel PERFECTA 16 Additional guide - English - 50 pages

Satel PERFECTA 16 Installation Guide - English - 27 pages

Satel PERFECTA 16 User Manual - German - 32 pages

Satel PERFECTA 16 Additional guide - German - 52 pages

Satel PERFECTA 16 Additional guide - German - 50 pages

Satel PERFECTA 16 Installation Guide - German - 28 pages

Satel PERFECTA 16 Quick start guide - Dutch - 11 pages

Satel PERFECTA 16 User Manual - Dutch - 32 pages

Satel PERFECTA 16 Additional guide - Dutch - 52 pages

Satel PERFECTA 16 Additional guide - Dutch - 50 pages

Satel PERFECTA 16 Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info