699464
22
Zoom out
Zoom in
Previous page
1/49
Next page
20 PERFECTA SATEL
The command content must be different from that of the other control commands
programmed in the control panel.
The control command for sending USSD codes can be used for sending SMS
messages through the control panel.
USSD codes from any number [USSD any tel.] – if this option is enabled, the control
command for sending USSD codes or checking balance of the SIM card account can be
sent from any phone. If this option is disabled, only from the phone the number of which is
saved on the control panel (see “Phones” p. 37).
4.2.1 Pre-paid support
USSD-check balance [681.USSDchkSIM1 / 682.USSDchkSIM2] – the USSD code which is
used to check balance of the SIM card account. If the code has been programmed, the
user can check e.g. the account balance by using keypad.
USSD-recharge [683.USSDtopSIM1 / 684.USSDtopSIM2] – the USSD code which is used to
top up the SIM card account. If the code has been programmed, the user can top up the
account by using keypad. Enter $ where the top-up code is to be entered.
Minimum level [685.Min.cr.SIM1 / 686.Min.cr.SIM2] – the minimum amount of funds on the
SIM card account. If the amount of funds drops below the minimum level:
trouble will be reported,
where the SIM card account balance is checked automatically by the control panel,
information on the account balance will be sent as an SMS message to the numbers of
phones for which the SMS
FORW
. option is enabled (see “Messaging” p. 37).
Check balance SMS [113.Chk.credit1 / 114.Chk.credit2] – the control command which can
be sent in an SMS message to check the SIM card account balance. You can enter up to 8
alphanumeric characters (digits, letters and special characters). You can enter spaces, but
at least one character must be different from the space.
The command content must be different from that of the other control commands
preprogrammed in the control panel.
Check balance at [687.hh:mm SIM1 / 688.hh:mm SIM2] – time at which the control panel
will check the SIM card account balance every day.
4.3 Keypad
Name [28.Names] – individual name of the keypad (up to 16 characters).
Alarm in part. [22.Partitions] – the partition in which alarm will be triggered in the event of
keypad tamper (opening of enclosure or loss of communication).
4.3.1 Options
Show partition 1 status [Show part.1] – if this option is enabled, the keypad LEDs and
display indicate the status of partition 1. The keypad will indicate the status of partition 2
only after entering code by the user who has access to partition 2.
Show partition 2 status [Show part.2] – if this option is enabled, the keypad LEDs and
display indicate the status of partition 2. The keypad will indicate the status of partition 1
only after entering code by the user who has access to partition 1.
Quick arm - partition 1 [Quickarm part.1] – if this option is enabled, quick arming (without
user authorization) of the partition 1 is possible.
Quick arm - partition 2 [Quickarm part.2] – if this option is enabled, quick arming (without
user authorization) of the partition 2 is possible.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel PERFECTA 16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel PERFECTA 16 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel PERFECTA 16

Satel PERFECTA 16 Quick start guide - English - 10 pages

Satel PERFECTA 16 User Manual - English - 31 pages

Satel PERFECTA 16 Additional guide - English - 50 pages

Satel PERFECTA 16 Installation Guide - English - 27 pages

Satel PERFECTA 16 User Manual - German - 32 pages

Satel PERFECTA 16 Additional guide - German - 52 pages

Satel PERFECTA 16 Additional guide - German - 50 pages

Satel PERFECTA 16 Installation Guide - German - 28 pages

Satel PERFECTA 16 Quick start guide - Dutch - 11 pages

Satel PERFECTA 16 User Manual - Dutch - 32 pages

Satel PERFECTA 16 Additional guide - Dutch - 52 pages

Satel PERFECTA 16 Additional guide - Dutch - 50 pages

Satel PERFECTA 16 Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info