699464
19
Zoom out
Zoom in
Previous page
1/49
Next page
SATEL PERFECTA 17
Trouble memory [Troubles memory] – if this option is enabled, the control panel will also
provide information about troubles that do not exist any more. You can clear the trouble
memory by using keypad (when exiting the trouble review function), PERFECTA
S
OFT
program or PERFECTA
C
ONTROL
application. Additionally, the option affects the audible
indication of trouble on the keypad:
option disabled – the trouble is audibly indicated until restore,
option enabled – the trouble is audibly indicated until review by using the 7.T
ROUBLES
user function (the user must press to quit the function) or trouble memory clearing
by using the PERFECTA
S
OFT
program or PERFECTA
C
ONTROL
application.
SMS notifications confirming ev. [Messaging events] – if this option is enabled, information
about sending SMS notification is saved in the event log.
Zone restore events [Restore events] – when this option is enabled, information about zone
restore is saved in the event log, if zone triggered alarm.
Limit number of events [Events limitat.] – if the option is enabled, events from the same
source are saved into the event log 3 times only. This option does not apply to the alarms
from zones.
Grade 2 [Grade 2] – if the option is enabled, the system operates in accordance with the EN
50131 standard requirements for Grade 2, i.e.:
the keypad does not audibly signal alarms and troubles/troubles memory,
– the LEDs on the keypad indicates alarms only after the user enters the code and
presses ,
– the LED on the keypad goes off after just one of the partitions is armed in any
mode,
– the flashing LED in keypad means that there is a trouble in the system, some zones
are bypassed, or there has been an alarm,
the keypad does not display alarm messages,
the keypad display cannot be switched over to the zone status presentation mode,
the quick arming from keypad (without entering the code) is not available,
new access codes in the system must be composed of at least 5 digits,
partial entering of the code is interpreted as entering an incorrect code,
– the keypad will be blocked after entering an incorrect code three times (cf. B
LOCK AFTER
THREE INCORRECT CODES
option),
during arming, the control panel checks for problems that prevent arming (cf. P
REVENT
ARMING IF NOT READY
option),
– A
RM EVEN IF NOT READY AFTER EXIT DELAY
, D
O NOT ARM IF BATTERY TROUBLE
and D
O NOT
ARM IF TAMPERED
options are interpreted as disabled,
control panel gives information about past troubles (cf. T
ROUBLE MEMORY
option),
loss of communication with SATEL server will cause a trouble (cf. D
O NOT REPORT A
SATEL
SERVER PROBLEM
option),
tamper of zone or expander can only be signaled by the external siren when the
partition to which the zone or expander belong is armed,
the number of alarms from the 7. 24
H
P
ANIC
and 8. 24
H
P
ANIC SILENT
zones is not limited
(A
UTO
-
RESET
3 option is ignored),
arming is impossible, if the 6. 24
H
T
AMPER
zone is violated (cf. P
RIORITY
option),
the warning alarm feature is enabled and the warning alarm is being signaled for at
least 30 seconds (cf. W
ARNING TIME
),
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel PERFECTA 16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel PERFECTA 16 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel PERFECTA 16

Satel PERFECTA 16 Quick start guide - English - 10 pages

Satel PERFECTA 16 User Manual - English - 31 pages

Satel PERFECTA 16 Additional guide - English - 50 pages

Satel PERFECTA 16 Installation Guide - English - 27 pages

Satel PERFECTA 16 User Manual - German - 32 pages

Satel PERFECTA 16 Additional guide - German - 52 pages

Satel PERFECTA 16 Additional guide - German - 50 pages

Satel PERFECTA 16 Installation Guide - German - 28 pages

Satel PERFECTA 16 Quick start guide - Dutch - 11 pages

Satel PERFECTA 16 User Manual - Dutch - 32 pages

Satel PERFECTA 16 Additional guide - Dutch - 52 pages

Satel PERFECTA 16 Additional guide - Dutch - 50 pages

Satel PERFECTA 16 Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info