699465
12
Zoom out
Zoom in
Previous page
1/31
Next page
10 PERFECTA SATEL
6.2.1 Factory default codes
By default, the following codes are preprogrammed in the control panel:
user 15 code: 1111
service code: 12345
The factory default codes should be changed before you start using your alarm
system (see: “Changing code”).
6.3 Arming
Completion of the steps below will start the arming procedure. The procedure ends when the
exit delay time elapses (if the procedure is completed successfully, the system becomes
armed – see also “Failure of arming procedure”). If the exit delay time is 0, the system
becomes armed instantly.
The day/night arming modes are available if the installer has defined which zones are
to be active in this armed mode.
During the exit delay countdown, you can leave the partition through the exit route
without triggering alarm.
6.3.1 Arming without partition selection
Enter the code, and then press:
- to arm in full mode,
- to arm in day mode,
- to arm in night mode.
In the partitions you have access to, the arming procedure will begin.
6.3.2 Arming the selected partition
1. Select the partition which is to be armed (press one of the keys: - partition 1; -
partition 2).
2. Select the arming mode (press one of the keys:
- full arming; - day arming;
- night arming). Backlight of the keys will start flashing, which indicates that the code
must be entered.
3. Enter the code.
4. Press
or press again the key corresponding to the selected arming mode.
5. In the selected partition, the arming procedure will begin.
When the quick arming is available, the steps 3 and 4 are skipped.
6.3.3 Quick arming
The installer may permit arming without entering the code.
1. Indicate the partition(s) to be armed (press one of the keys: - partition 1; -
partition 2; or - both partitions).
2. Select the arming mode (press one of the keys: - full arming; - day arming;
- night arming).
3. In the partition(s), the arming procedure will begin.
6.3.4 Arming without delay
If there is nobody in the partition or nobody is leaving the partition which is to be set to the
day / night armed mode, you can arm the partition without exit delay (there will be no beeps
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel PERFECTA 16-WRL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel PERFECTA 16-WRL in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel PERFECTA 16-WRL

Satel PERFECTA 16-WRL Quick start guide - English - 10 pages

Satel PERFECTA 16-WRL Additional guide - English - 49 pages

Satel PERFECTA 16-WRL Additional guide - English - 50 pages

Satel PERFECTA 16-WRL Installation Guide - English - 27 pages

Satel PERFECTA 16-WRL Quick start guide - German - 11 pages

Satel PERFECTA 16-WRL User Manual - German - 32 pages

Satel PERFECTA 16-WRL Additional guide - German - 52 pages

Satel PERFECTA 16-WRL Additional guide - German - 50 pages

Satel PERFECTA 16-WRL Installation Guide - German - 28 pages

Satel PERFECTA 16-WRL Quick start guide - Dutch - 11 pages

Satel PERFECTA 16-WRL User Manual - Dutch - 32 pages

Satel PERFECTA 16-WRL Additional guide - Dutch - 52 pages

Satel PERFECTA 16-WRL Additional guide - Dutch - 50 pages

Satel PERFECTA 16-WRL Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info