699548
8
Zoom out
Zoom in
Previous page
1/52
Next page
6 MICRA SATEL
3. I
NSTALLATION
Disconnect power before making any electrical connections.
Before connecting the power supply source (battery, alternating voltage from
transformer), you should first complete all the installation work.
The following tools will be useful during installation:
blade screwdriver 2.5 mm,
Phillips screwdriver,
precision pliers,
flat nose pliers,
drill with a set of drill bits.
3.1 INSTALLATION PLAN
If the module is to be a component of alarm system, the installation should be preceded by
preparing a plan of arrangement in the premises of all devices to be included in such
a system, i.e. MICRA module, detectors, keypad and sirens.
3.2 ESTIMATION OF CURRENT CONSUMPTION
Before proceeding to installation, sum up the currents consumed by all devices to be power
supplied by the module (the calculation should also take into account the battery charging
current.). The sum of such currents must not exceed the current output of the built-in power
supply. If the sum of currents exceeds the power supply current output, an additional power
supply unit must be used.
When planning connection of devices to power output, remember that the sum of
currents consumed by these devices must not exceed the maximum current-carrying
capacity of this output.
3.3 CABLING
It is recommended that straight unscreened cable be used for making electric connections
(using the twisted pair type of cable, e.g. UTP, STP, FTP is not advisable). Select cross-
section of the power supply wires so that the supply voltage drop between the power supply
and the supplied device should not exceed 1 V as against the output voltage.
When making the cabling, remember that there must be sufficient distance between the low-
voltage wires and the 230 V AC power supply wires. Avoid running the signal cables in
parallel to the 230 V AC supply cables, in close vicinity of them.
3.4 THE MICRA MODULE INSTALLATION
The module PCB contains electronic components sensitive to electric charges.
The MICRA module should be installed indoors, in spaces with normal air humidity. The
installation place should be inaccessible to unauthorized persons. When selecting the
installation place, take into consideration that thick walls, metal partitions, etc. will reduce the
radio signal range. Installation in close vicinity of electrical systems is not recommended, as it
may adversely affect the device performance.
An unswitched 230 V AC supply must be available at the module installation place. The
power supply circuit should be protected with a proper safety device.
8


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info