699075
46
Zoom out
Zoom in
Previous page
1/51
Next page
44 User Manual SATEL
4 short and 1 long beeps the message has been confirmed, there are no more voice
messages,
2 long beeps an invalid code has been entered (the message has not been confirmed).
If the control panel is sending messages about several events and confirmation of the
voice messages is required, each message should be confirmed. The first message
must be confirmed before the second message can be played back, an so on.
The installer can configure the control panel so that acknowledgement of receiving the
message by the user will:
clear messaging other users,
allow to get access to the INT-VG module voice menu.
10. Call answering and telephone control
The information below does not apply to the control panels to which the INT-VG
module is connected.
The call answering and telephone control functions are available to the users who have the
telephone code. These functions require that the DTMF dialing phone be used. The call
answering function allows to get information on the partition status (armed, disarmed). Owing
to the telephone control function, it is possible to control the REMOTE SWITCH type outputs
using the telephone.
10.1 Answering phone calls
1. Establish connection with the control panel, using one of the following methods (consult
the installer to learn which method is supported by the control panel):
single callcall the telephone number of control panel. The control panel will answer the
call after the number of rings programmed by the installer.
double call call the telephone number of control panel. Hang up after the number of
rings programmed by the installer. Call again within three minutes. The call will be
answered by the control panel immediately.
Establishing connection will be signaled by three short beeps.
2. Enter the telephone code on the telephone keypad. 4 short beeps and 1 long beep will
confirm that you have got access to the call answering function. If the entered code is
invalid, this will be signaled by the control panel by two long beeps.
If you make a mistake when entering the code, enter the 4 digits anyway, and when
the control panel signals that the code is wrong, enter the correct code.
After entering three wrong codes, the control panel will hang up.
In case of a single call, if:
no code has been entered and the connection is terminated,
an invalid code has been entered and the connection is terminated,
the control panel will answer no calls for the next few minutes. It enables e.g. a fax to
be connected after the control panel.
3. Within up to 15 seconds, enter the 2-digit partition number (e.g. 01, 07 or 15). The control
panel will inform you about the partition status by means of sound signals:
3 short beepspartition disarmed,
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 64 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 64

Satel Integra 64 Additional guide - English - 114 pages

Satel Integra 64 Installation Guide - English - 36 pages

Satel Integra 64 Additional guide - German - 121 pages

Satel Integra 64 User Manual - German - 54 pages

Satel Integra 64 Installation Guide - German - 38 pages

Satel Integra 64 Quick start guide - German - 2 pages

Satel Integra 64 User Manual - Dutch - 52 pages

Satel Integra 64 Quick start guide - Dutch - 24 pages

Satel Integra 64 Additional guide - Dutch - 121 pages

Satel Integra 64 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info