699075
100
Zoom out
Zoom in
Previous page
1/114
Next page
98 Programming SATEL
12.1.3 SIA-IP
If events are to be sent in the SIA-IP format, you must program additional parameters for
each monitoring station.
Send MAC address [MAC] if this option is enabled, the MAC address of ETHM-1 /
ETHM-1 Plus module will be sent with event code.
Send timestamp [Timestamp] if this option is enabled, the date and time will be sent with
event code (the monitoring station can change the date and time in the control panel).
Encrypt data [Coded] if this option is enabled, the data to be sent will be encrypted, and
the date and time will be sent with event code (the monitoring station can change the date
and time in the control panel).
SIA-IP key the key to encrypt data to be sent using the SIA-IP format.
hex if the option is enabled, you can enter up to 32 hexadecimal characters as the SIA-IP
KEY
. If the option is disabled, you can enter up to 16 alphanumeric characters as the
SIA-IP KEY.
SIA-IP acct a string of up to 16 hexadecimal characters, which is used to identify the
control panel for the purpose of reporting in SIA-IP format.
Supervision interval [SIA-IP test] an additional transmission can be sent at specified
intervals to check communication with the monitoring station. You can program a number
of days, hours, minutes and seconds between the transmissions.
12.1.4 Identifiers assignment
Define the identifier with which events relating to individual partitions, zones, keypads and
expansion modules will be sent. If no identifier is assigned to the given element of the
system, it will be impossible to define codes for events relating to it.
12.1.5 Event codes
For the pulse and Ademco Express formats, it is necessary to program codes which will be
reported to the monitoring station if the defined events occur. The reported events are those
for which a code different from 00has been programmed. 2 hexadecimal characters (digits
or letters from A to F) are to be programmed.
In case of the CONTACT ID (SELECTED) and SIA (SELECTED) formats, indicate the events
which are to be reported, entering for them any code different from 00 (a code
consistent with the format specification will be sent, not the entered one). The events
for which the 00code has been programmed will not be reported.
12.1.6 Test transmissions
The test transmission may be sent:
at a specified time. The test transmission code will be sent regularly at a defined time. The
number of days between transmissions and the time of sending transmission are
programmed.
in specified time intervals. For each monitoring station, the number of days, hours and
minutes between transmission can be individually programmed. The test transmission
code will be sent:
after a predefined period of time has elapsed since the last transmission, irrespective of
whether it was a test transmission, or the code of another event was sent (the NO SYNC.
TO LAST TRANSMISSION
option disabled),
at predefined time intervals (the NO SYNC. TO LAST TRANSMISSION option enabled).
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 64 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 64

Satel Integra 64 User Manual - English - 51 pages

Satel Integra 64 Installation Guide - English - 36 pages

Satel Integra 64 Additional guide - German - 121 pages

Satel Integra 64 User Manual - German - 54 pages

Satel Integra 64 Installation Guide - German - 38 pages

Satel Integra 64 Quick start guide - German - 2 pages

Satel Integra 64 User Manual - Dutch - 52 pages

Satel Integra 64 Quick start guide - Dutch - 24 pages

Satel Integra 64 Additional guide - Dutch - 121 pages

Satel Integra 64 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info