699075
78
Zoom out
Zoom in
Previous page
1/114
Next page
76 Programming SATEL
Disable downloading [Block DWNL] with this option enabled, starting communication with
the DLOADX program from pinswill be impossible.
Hide service mode after [Hide SM after] the time counted from the last operation
performed in the service menu, after expiry of which the service mode menu will be hidden
(see: p. 6). If value 0 is programmed, the automatic hiding of the service mode will be
disabled.
Service mode beep [SM sounds] with this option enabled, the service mode will be
acoustically signaled in the keypad.
User code min. length [Min. code length] the minimum required number of digits in the
user code. The parameter will be taken into account when creating and editing the codes
(but it has no effect on the codes already existing in the system).
6.7 Other parameters
Prefix lengththe required number of digits in the prefix. Entering a number different from 0
means that from now each code will have to be preceded by a prefix:
normal for everyday use. By default, it consists of a suitable number of digits 0 (e.g. if
the prefix length has been set at 4, the default prefix will be: 0000),
DURESS to be used, when the user is forced to enter the code. If used, a silent alarm
will be triggered. By default, it consists of a suitable number of digits 4 (e.g. if the prefix
length has been set at 3, the default prefix will be: 444).
The prefixes and their validity can be programmed by the administrator (master), using the
CHANGE PREFIX function.
Each change of the prefix length restores the prefix factory values.
The service code need not be preceded by a suitable prefix it is enough when the
number of digits preceding the code matches the prefix length.
PING test the ETHM-1 (firmware version 1.05 or newer) / ETHM-1 Plus modules can test
communications by using the PING command sent to the indicated network device. The
ETHM-1 / ETHM-1 Plus module will be testing communication after the parameters
described below are configured and the PING TEST option is enabled in the module itself.
In the DLOADX program, you can program the PING test parameters in the Structure
window, Hardwaretab, after you click on the keypad bus.
Address to test [PING] address of the device to which the module is to send the PING
command to test communications. It can be entered as an IP address (4 decimal
numbers separated by dots) or as a name.
Period [PING period] the interval between consecutive communication tests by using the
PING command. If value 0 is programmed, the communication test will be disabled.
Tries no. before trouble [PING tries] the number of unsuccessful communication tests
(the module has received no answer to the PING command sent) after which trouble will
be reported. If value 0 is programmed, the communication test will be disabled.
Integration encryption key [Integrate key] if the ETHM-1 / ETHM-1 Plus module is used
for integration of the control panel with other systems and the communication over
Ethernet network is to be encrypted, enter the key with which the data will be encrypted:
up to 12 alphanumeric characters. In the DLOADX program, the encryption key can be
programmed in the Structurewindow, Hardwaretab, after clicking on the keypad bus.
6.8 Default user's authority level
You can define which user rights will be automatically assigned to a new user. The list of
permissions can be modified during user creating or editing.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 64 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 64

Satel Integra 64 User Manual - English - 51 pages

Satel Integra 64 Installation Guide - English - 36 pages

Satel Integra 64 Additional guide - German - 121 pages

Satel Integra 64 User Manual - German - 54 pages

Satel Integra 64 Installation Guide - German - 38 pages

Satel Integra 64 Quick start guide - German - 2 pages

Satel Integra 64 User Manual - Dutch - 52 pages

Satel Integra 64 Quick start guide - Dutch - 24 pages

Satel Integra 64 Additional guide - Dutch - 121 pages

Satel Integra 64 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info