699075
53
Zoom out
Zoom in
Previous page
1/114
Next page
SATEL INTEGRA 51
The value of EOL resistors programmed for the INTEGRA 128-WRL mainboard zones
applies also to the zones in the keypads:
INT-KLCD and INT-KLCDR with electronics version 3.2 and firmware version 2.11
(or newer),
INT-KLFR.
The value of EOL resistors for the zones in expanders can be programmed:
using the keypad, in the service mode, by means of EOL R1 RESISTOR and EOL R2
RESISTOR
functions (STRUCTURE HARDWARE EXPANDERS SETTINGS [expander
name] EOL R1 RESISTOR / EOL R2 RESISTOR),
using the DLOADX program, in the Structurewindow, Hardwaretab, after clicking on
the given expander.
For the zones in INT-KSG keypad, the value of EOL resistors is programmed in the DLOADX
program, Structurewindow, Hardwaretab. After clicking on the given keypad, select the
corresponding tab. The value of these resistors cannot be programmed from the keypad.
Fig. 4. Numeration of EOL resistors. T tamper. A alarm. In case of the EOL configuration,
the resistor value is a sum of the values programmed for the R1 and R2 resistors.
4.3.3 Programming the zones
The zones can be programmed :
using the keypad, in the service mode, by means of the functions available in the ZONES
submenu.
using the DLOADX program:
1. in the Structurewindow, Systemtab, after clicking on the selected zone,
2. in the Zones window.
4.3.4 Zone parameters
Zone nameindividual name of the zone (up to 16 characters).
Assigned to partition to which the zone belongs.
Zone type (see: Zone types p. 53).
Entry delay refers to the delayed zones (including the zone types: 0. ENTRY/EXIT,
1. ENTRY, 2. DELAYED, 3. INTERIOR DELAYED, 85. ENTRY/EXIT CONDITIONAL, 86. ENTRY/EXIT
FINAL, 94. ENTRY/EXIT INTERIOR and 95. ENTRY INTERIOR). The alarm from the zone will be
delayed by a preset time. This makes it possible to disarm the partition before the alarm is
triggered.
Signaling delay refers to the 4. PERIMETER, 5. INSTANT and 6. EXIT type zones. Loud alarm
signaling can be delayed by a programmed time period.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 64 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 64

Satel Integra 64 User Manual - English - 51 pages

Satel Integra 64 Installation Guide - English - 36 pages

Satel Integra 64 Additional guide - German - 121 pages

Satel Integra 64 User Manual - German - 54 pages

Satel Integra 64 Installation Guide - German - 38 pages

Satel Integra 64 Quick start guide - German - 2 pages

Satel Integra 64 User Manual - Dutch - 52 pages

Satel Integra 64 Quick start guide - Dutch - 24 pages

Satel Integra 64 Additional guide - Dutch - 121 pages

Satel Integra 64 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info