699075
13
Zoom out
Zoom in
Previous page
1/36
Next page
SATEL INTEGRA 11
In order to guarantee correct functioning of the system components it is important that
resistance and capacitance of the signal wires be as low as possible. When the distances
between the devices are greater, several wires connected in parallel may have to be used for
each signal, in order to reduce conductor resistance. This, however, may lead in
consequence to an increase in conductor capacitance. Too high resistance or capacitance of
the cables connecting the control panel to keypads or expansion modules can prevent the
devices from working correctly (e.g. the control panel will be unable to identify devices,
absence of devices will be reported, etc.). When selecting the length of cables, follow
recommendations set out in sections on connection of particular types of devices.
When making the cabling, remember that there must be sufficient distance between the low-
voltage wires and the 230 V AC power supply wires. Avoid running the signal cables in
parallel to and in close proximity of the 230 V AC supply cables.
5.4 Installation of control panel mainboard
The control panel mainboard contains electronic components sensitive to
electric charges.
You must complete all wiring, connections and device installations before
connecting the battery or applying AC mains to the control panel.
The control panel should be installed indoors, in spaces with normal humidity of air. The
control panel must be protected against unauthorized access.
A 230 V AC power supply circuit with protective grounding must be available at the control
panel installation place.
5.4.1 Description of the mainboards
Description of terminals:
AC - power supply inputs
COM - common ground
OUTn - programmable outputs (n=output number):
high-current: OUT1...OUT2 (INTEGRA 24 and INTEGRA 32)
OUT1...OUT4 (INTEGRA 64 and INTEGRA 128)
low-current: OUT3...OUT4 (INTEGRA24)
OUT3...OUT8 (INTEGRA 32)
OUT5...OUT16 (INTEGRA 64 and INTEGRA 128)
+KPD - power supply output for powering the devices connected to keypad
bus (13.6...13.8 V DC)
DTM - keypad bus data
CKM - keypad bus clock
+EX / +EX1 / +EX2 - power supply output for powering the devices connected to expander
bus (13.6...13.8 V DC)
DT / DT1 / DT2 - expander bus data
CK / CK1 / CK2 - expander bus clock
AUX - power supply output (13.6...13.8 V DC)
Zn - zones (n=zone number)
- protective terminal of telephone communicator (connect to protective
circuit only)
TIP, RING - telephone line input (from telephone provider)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 64 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 64

Satel Integra 64 User Manual - English - 51 pages

Satel Integra 64 Additional guide - English - 114 pages

Satel Integra 64 Additional guide - German - 121 pages

Satel Integra 64 User Manual - German - 54 pages

Satel Integra 64 Installation Guide - German - 38 pages

Satel Integra 64 Quick start guide - German - 2 pages

Satel Integra 64 User Manual - Dutch - 52 pages

Satel Integra 64 Quick start guide - Dutch - 24 pages

Satel Integra 64 Additional guide - Dutch - 121 pages

Satel Integra 64 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info